2016 Customer Testimonials

Filter by YearFilter by State or Province
2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 Alabama Alberta Arizona Arkansas British Columbia California Campbell River Colorado Connecticut Delaware Florida Georgia Illinois Indiana Louisiana Maine Manitoba Maryland Massachusetts Michigan Minnesota Missouri New Hampshire New Jersey New Mexico New York Newfoundland and Labrador North Carolina Nova Scotia Ohio Ontario Oregon Pennsylvania Prince Edward Island Québec Saskatchewan South Carolina Tennessee Texas Utah Vermont Virginia Washington Wisconsin

Last updated: November 6, 2018

…worth every penny!…

Nov 29, 2016I just wanted to THANK YOU for providing this SERVICE. I phoned and spoke to Mr. Simons who encouraged me to go ahead and remove the timer myself, I did it without too much trouble. I packaged the part & sent it off for repair. It was promptly repaired and returned to me and I reinstalled the repaired timer. As a 70 year old single woman I am just a bit pleased with myself for giving it a go. But I am REALLY PLEASED that this service exists. And the pricing is certainly fair and worth every penny!

Thank you again

Cathie Carter
Washington, Michigan
Re: General Electric JSP31GoP4WH WB27K5140

…great and speedy service…

Nov 21, 2016Received the repaired timer back today and it works like new. Thanks for the great and speedy service and best of all at a reasonable price.

Regards,

Wally Dietel
Longview, Washington
Re: Whirlpool RF3850XVX 0 3149808

…recommend your service…

Nov 06, 2016I want to thank you for the excellent service and repair on my oven control, I installed it the minute I received it from Appliance timers and it has performed as new. Sears could not help me in this repair and I will be glad to recommend your service for any future repairs.

Melvin Sorensen
Glenwood, Illinois
Re: Kenmore gas built-in oven 342145

…saved me $4-5K…

Oct 05, 2016I sent my old timer in last week and it arrived on Friday at the repair facility. By 2PM MDT the same day, it was repaired and ready to ship. It got installed yesterday and everything is back to normal. Thank god as my wife had already picked out a new fridge and dishwasher, to match the new oven she was also going to buy. It saved me $4-5K.

Thanks!!!

Doug Comeau
Edmonton, Alberta
Re: Frigidaire CFES387CFS5 318012928

…saved almost $5,000…

Oct 04, 2016The repair company we have been using for years said: "The timer is bad and cannot be replaced, You need to buy a new Oven/range". Replacing our Thermadore dual-fuel meant >$5,000.

After searching on google, I found ApplianceTimers.com Everything worked as advertised. I removed my timer (thanks to some help from google, again), carefully taking pictures as I did it so I would know how to put it back together. Two weeks after sending my timer out, it was repaired and returned - just as advertised. I installed it last night, and my Thermadore is as good as new! Couldn't be happier - and saved almost $5,000.

ApplianceTimers has been GREAT to work with.

Five Stars out of five!

Tom Wadsworth
Cleveland, Ohio

…display is brighter than … when it was new!…

Sep 27, 2016We just wanted to say THANK YOU so very much for fixing our oven/timer control for our Kenmore Elite Stove!

We had all but given up on this stove....Our son searched online and found you....We sent the part to you and kept our fingers crossed.

Not only did you send it back working ...but the digital display is brighter that it ever has been even when it was new! It had gotten so dim we literally had to close the blinds and turn out the lights and cup our hands around it to see the temperature read out ... it was crazy. You literally saved us a couple of thousand dollars on a new stove. You have very happy customers here....the first thing I did was bake brownies...we had been with out an oven for 7 months....with California weather and it being Bar-B-Que season we didn't miss it a lot...but my family missed my baking, so now we can really plan for the holidays and all the goodies that go with it !!!

Thanks Again....I have been singing your praises to all who listen!

Lee-Anne & Paul Martinez
Suisun City, California
Re: Kenmore 790.75503 318010102

Sep 14, 2016Repaired Display for Jenn Air Stove ClockYou recently repaired my timer. I installed it last night. The timer looks better than it had is many years.

Thank you for fantastic service.

Tom Fetzer
Pearland, Texas
Re: Magic Chef Jenn Air W130 7601-P123-60

…very fast…

Jul 23, 2016Thank you for your excellent customer service. Received timer very quick, and $50 reimbursement very fast.

Andre Grenier
St-Basile le Grand, Québec
Re: Whirlpool GJP84802 9754261

…like brand new again…

Jul 21, 2016Thank you soo much for repairing the timer for my range! I certainly will spread the word about how great your company is and how reasonable your prices are! I am so thankful I found your company! My range is working like brand new again!

Thank You

Jeannine Huntington
New Carlisle, Québec
Re: General Electric JCBP810DT1WW REH06XM022CN-AB

…great service…

Jul 15, 2016My timer display was dim where it was difficult to read the time / baking temperature - they also no longer produced the parts. Got my timer back today and everything is bright and visible! Took about 1 week from first shipping the timer to getting it back. Great service on the phone and happy with the work!

Jon
Toronto, Ontario
Re: Frigidaire FGF378WCCG 316080102

Thrilled with the service!…

Jun 20, 2016Received the part today. My dad installed it in less than 15 minutes. It works great! Thrilled with the service!

Natalie Brugge
Surrey, British Columbia
Re: Frigidaire CFEF372CS1

…working perfectly…

Jun 05, 2016Timer installed today and is working perfectly! Thank you so much !! Glad to give you endorsements if want for your on-line page.

Thank you for your expert work and quick turn around.

Arch Webster
Silver Spring, Maryland
Re: Amana ARR 405 AP49715

…faster than expected…

Jun 04, 2016I wanted to let you know the timer came back faster than expected and has been working great for over a month.

Thank you very much for the excellent service.

Milton Hobbs
Hephzibah, Georgia
Re: Maytag LAW9304AAE 22001256

Thank you so much…

May 02, 2016Thank you so much for fixing my timer. I have installed it and now I can set the bake temperature as well as dial in time or anything else. Finding your service to repair was a savior because I would not be able to find a gas oven in beige that fits in the space the way the current one does, plus the expense of a new one when there really wasn't anything wrong with the old one would be a shame.

Sincerely,

Marcia Dietrich
New Brighton, Minnesota
Re: Magic Chef

…they said it wasn't fixable…

Apr 21, 2016Just want to say thank you for repairing my oven timer. I had taken it to a timer repair shop in Toronto before sending it to you and they said it wasn't fixable. I didn't have much hope that you'd be able to fix it, but figured there wasn't much to lose aside from the shipping cost. I was so pleased to receive the repaired timer today. It was in even better condition than I sent it to you in - the beeper is louder and screen display brighter. I wouldn't hesitate to recommend your service to anyone in need of a timer repair.

Thanks again.

Ben Ball
Toronto, Ontario
Re: Thermador RDSS30 14-33-347

…works great…

Apr 20, 2016Just put my repaired timer in my oven and it works great! This is my second time dealing with Appliance Timers, and I am very pleased with the service! My friend was told her timer was obsolete and she needed a new $1200.00 built in oven. I found Appliance Timers and convinced her to try it. That was about three years ago, and it works great!

Thank you again!

Jim Roberts
Cleveland, Ohio
Re: Magic Chef 59fn5tvw

Your service makes so much sense…

Mar 02, 2016Thank you very much for the quick and efficient repair of our range timer. We are glad that we were able to have the stove repaired, rather than have to dispose of it. Your service makes so much sense, in many ways.

Keith Lloyd-Walters
Campbell River, Campbell River
Re: Maytag MER6872BCW

…very satisfied customer…

Feb 22, 2016I received the repaired Maytag oven controller today, installed it, and it works just fine. I wanted to thank you for repairing the unit and installing the new overlay. Please feel free to use this note as a reference for a "very satisfied customer"

Thank You

John Gauger
Winsted, Connecticut
Re: Maytag CHG9800BAE 74001639

…works as new

Feb 22, 2016Thanks Howard – works as new! While the appliance repair guy suggested I buy new a new wall mount range (and charged $134.00 for the service call), I didn’t like the $1800 price tag for a new one, even after my wife said she would pay half! Your control rebuild was the right call.

Walter Rhead
Regina, Saskatchewan
Re: Frigidaire CGEB27S7CS1 318010701

…job well done…

Feb 21, 2016My timer just arrived. I put it in AND IT ALL WORKS! Oven went all the way to 500 degrees for first time in months. Just wanted to thank you for a job well done.

Mark McWaters
Longwood, Florida
Re: General Electric SP38GDS3BG

Sad, but I just don't experience the kind of service you've given very often…

Feb 02, 2016Howard:

The oven is back together. We set it at 350 and put two oven thermometers in it-- one hit 350 on the nose, the other about 5 degrees higher-- think it's probably our old thermometers!

Thanks for all your help with this. Each time I emailed you with a question, I was just about in a panic, and I think you returned each of these emails within the hour with exactly the information I needed.

Just wanted you to know that it's meaningful to me, and it speaks especially well of you as a man. You're a rare one these days.

If there is any "entity" I could write to with an "Atta-boy" or a place to put a review, please don't be shy in letting me know. Honestly, I can't remember the last time I was treated so well by a businessman, certainly not locally. I guess I had to go all the way to Quebec to find someone with your kind of integrity.

It's been about 4 years since the oven quit. I think you know what we went through trying to get a replacement, or you wouldn't be rebuilding these. We finally came to a point where we were either going to replace it for $1000 + or just continue to live with it not working. Again, your price was fair, and your workmanship did the job. I only wish we'd found your website before!

Thanks, Howard! We'll think of you with the first batch of cookies.

Tom Gillette

Thomas Gillette
Howell, Michigan
Re: Frigidaire 530327257

Thanks for the prompt and friendly service.…

Feb 01, 2016I received the repaired part today and I have already reinstalled it. It is working great. Like they say "If Momma isn't happy nobody's happy" Well Momma's happy her oven is working and as I don't have to buy a new stove so am I. Thanks for the prompt and friendly service.

I will certainly recommend you to all my friends and service stores in Duncan.

Mike

Michael Williams
Duncan, British Columbia
Re: General Electric JKP13G0T1BB WB27K5190

…good as new…

Jan 29, 2016Thank you for repairing my oven timer. I’ve installed it and it seems to be working perfectly...good as new. Total cost was about $260, but that includes the temperature probe that I replaced, which made no difference. The cost to replace the oven would have been around $1500, so I’m a happy camper!

Best Wishes from North Carolina,

Phil Weston

Phil Weston
Charlotte, North Carolina
Re: General Electric JKP13G0P3BG

…wonderful service…

Jan 21, 2016Thank you, all received and installed. All works fine. Much appreciated for the wonderful service.

Matt

Matt Kickbush
Kaleden, British Columbia
Re: Thermador Thermador RDDS30RS 486752

…great service…

Jan 13, 2016Received the timer today and installed it; oven working - wife happy, thanks very much, great service.

Don Newbury
Chatham, Ontario
Re: General Electric GE XL44 Gas Range - model JGBP79WEW1WW wb12k19

Works perfectly!…

Jan 11, 2016Thank you! Installed the rebuilt part today. Works perfectly!

Thanks

John Myers
Oakdale, California
Re: General Electric jtp10gsbg

…not used to that kind of treatment…

Jan 08, 2016Mr. Simons-- thanks for the tip. I'll pull the oven out of the wall this weekend and give it a go. It speaks well of you, VERY well to share that with us possibly at the expense of losing a sale...not used to that kind of treatment in today's world!

Tom Gillette
Howell, Michigan
Re: Frigidaire 530327257

…calibration on our rebuilt board is SPOT ON…

Jan 03, 2016With the hustle of the holidays, I neglected to follow-up with you to THANK YOU for your prompt, courteous and professional service on my defective oven control board. We found our ~20 year old oven was a full 150-200 degrees off when we moved into our newly-purchased home just prior to Thanksgiving. Because you were able to turn around our repair request efficiently, we were able to successfully host Thanksgiving, bake for the new neighbors, and otherwise enjoy a fully functional kitchen over the holidays. The calibration on our rebuilt board is SPOT ON, as confirmed by a secondary oven thermometer.

Thanks again for your help! Please let me know if there is somewhere you might ask that we post a rating or general feedback.

Best wishes for a healthy and prosperous New Year,

Lance Dieter
Acton, Massachusetts
Re: Magic Chef 59FN5TVW 7601P177-60

Tell us what you think of ApplianceTimers.ca