WB27K5213 General Electric Range (Stove, Oven) Timer Repair

Failure codes, problems, and resolutions for General Electric timer model # WB27K5213

General Electric (GE) ERCs and General Electric (GE) stove clocks and timers Manufacturer :  General Electric
Part Number :  WB27K5213
Appliance Type :  Range (Stove, Oven)
Color : 
Description :  Clock/oven control

 
 
Do you have a failed General Electric WB27K5213 timer?
Click here:

We can repair or replace your faulty WB27K5213 timer.
Request Appliance Timer Service

Recent Service Requests for General Electric Part Number WB27K5213

CityModel NumberFailure CodeProblem DescriptionResolution
Mission, KansasJTP55N/AUpper oven bake function does not heat.Awaiting receipt of timer
Gonzales, Louisiana911.41155590F1F1 AND BEEPS CONSTANTLY IF POWER IS ONRepaired
Avon, New YorkN/Arepeated f1 codeAwaiting receipt of timer
omaha, NebraskaZET757WV1WWNO FAILURE CODELOWER OVEN WILL NOT HEAT....OVEN/BROILER/OR CONVECTION.Timer inspected, no repairs necessary
North Richland Hills, Texas911-41159590F1F1 stays on with warning signal. Tried to reset by tuyrning power off to ovens but F1 returns immediatelyBeyond Repair
Mountain lakes, New JerseyN/ASwitch for lights not workingAwaiting receipt of timer
Hayden, IdahoJTP 55 WOV1WWF 1F1 code and beepingRepaired
Winder, GeorgiaJTP45W0V2WWDo not Know#1 - Control Unit, for top oven, will not go through a complete cleaning cycle. Starts Ok, but then gives a error code so that you have to kill the AC and then let the oven cool before it can be unlocked. #2 - Fans on both ovens will not run even when the oven is hot enough to cause them to start.Repaired
CARTHAGE, MissouriJTP56A0V1AAN/AThis control works normally until you put in in bake, it then comes on and begins heating, but after 1-2 minutes it shuts down, just as if you pushed cancel. You can restart it immediately and it repeatedly does the same thing. For what it is worth, if you do this 10-15 times and the tempperature gets over 200 degrees it will sometime stay on and bake normally. We have tried starting the unit and disconnecting the ribbon cable from the touch board and it still shuts down in 1 or 2 minutes. We may want have you scrap it if not repairable, we will need to contact customer, please advise.Repaired
Winder, GeorgiaJTP45W0V2WWDo not Know#1 - Control Unit, for top oven, will not go through a complete cleaning cycle. Starts Ok, but then gives a error code so that you have to kill the AC and then let the oven cool before it can be unlocked. #2 - Fans on both ovens will not run even when the oven is hot enough to cause them to start.Repaired