WB27K5103 General Electric Range (Stove, Oven) Timer Repair

Failure codes, problems, and resolutions for General Electric timer model # WB27K5103

General Electric (GE) ERCs and General Electric (GE) stove clocks and timers Manufacturer :  General Electric
Part Number :  WB27K5103
Appliance Type :  Range (Stove, Oven)
Color : 
Description :  Electronic clock control kit (part number WB27K5103 replaced with WB27T10324)

 
 
Do you have a failed General Electric WB27K5103 timer?
Click here:

We can repair or replace your faulty WB27K5103 timer.
Request Appliance Timer Service

Recent Service Requests for General Electric Part Number WB27K5103

CityModel NumberFailure CodeProblem DescriptionResolution
Boston, MassachusettsunknownunknownOven starts to heat, gas turns on, then within a minute, oven turns off as if it's reached operating temp. Never gets over 100+ degrees F Please repair our unit due to uncertain lead placement on replacement units Call 1-617-699-4939 or 1-888-257-3882 for instructions if not repairableRepaired
Parma, Ohiojgrp17wep2wgF1Bought old stock oven that appears to have never been used based on oven interior and parts still in packaging. Concerned how this panel could be damaged if this unit was indeed never fired up. Please let me know if there is no problem with the time as the problem could lie elsewhere.Repaired
MENTOR, Ohio911.3042992NONEFace of timer starts out at 260 (when it should be 100) degrees when oven is cold, have to set temp setting of 550 degrees to get 350 degrees.Repaired
MENTOR, Ohio911.3042992NONEFace of timer starts out at 260 (when it should be 100) degrees when oven is cold, have to set temp setting of 550 degrees to get 350 degrees.Repaired
Pensacola, FloridaJGRP16GET1BBUNKNOWN24" wall oven controller will not send "bake" or "broil" signal, when pressing the keypad, to the igniter. It just blinks. It may have shown an error code before failure, but my wife cannot remember which one.Awaiting receipt of timer
Wayne, MichigannoneTimer acts like it is working but ot will not send any electrical signals out at all.Repaired