WB27K5073 General Electric/Kenmore Range (Oven, Stove) Timer Repair

Failure codes, problems, and resolutions for General Electric/Kenmore timer model # WB27K5073

General Electric (GE) ERCs and General Electric (GE) stove clocks and timersKenmore ERCs and Kenmore stove clocks and timers Manufacturer :  General Electric/Kenmore
Part Number :  WB27K5073
Appliance Type :  Range (Oven, Stove)
Color : 
Description :  Clock / Oven Control

Do you have a failed General Electric/Kenmore WB27K5073 timer?
Click here:

We can repair or replace your faulty WB27K5073 timer.
Request Appliance Timer Service

Clock / Oven Control timer Part Number WB27K5073 is used in the following appliances

Recent Service Requests for General Electric/Kenmore Part Number WB27K5073

CityModel NumberFailure CodeProblem DescriptionResolution
Conshohocken, Pennsylvania911-4672991N/AClock went dark, cannot use oven.Repaired
Trussville, AlabamaJSP 31NoneAll functions seem to work with the exception of oven temperature. For example, when set to 400 degrees, oven will display 400 but is actually around 365 degrees. Have replaced oven sensor and bake element , no change.Awaiting receipt of timer
LYONS, IndianaJRP14GOP2BGWon’t turn on at aRelays were intermittent replaced relays then I was getting a f2 and sometimes getting f3 code then went completely offRepaired
Slidell, LouisianaJSP31GOP2WHN/AOven does not reach temperature set on circuit board, but board indicated the set temperature has been reached.Awaiting receipt of timer
Ancaster, OntarioJCKP14WS-1F3Oven heats up but shuts off after 15 min and beeps with an F3 code. I replaced the oven temp sensor since I had also seen intermittent F2 codes. The broiler appears to operate normally. The oven is a GE manufactured by Camco circa 1995.Repaired
Burlington, OntarioJckp13gr-3NonThe oven does not reach "required" temperature. When the oven is turned on It doesn't start immediately and takes around 40 to 45 minutes for it to start. When it starts , it doesn't reach the required temperature.Repaired
Fairfield, CaliforniaRJ734GOP1BGNoneNeither Oven nor Broiler function works. Display appears normal and all input power ,sensors, switches and connections have been verified. Once function and temp have been selected, oven cycles to start for ~10sec then stops > clock displayed.Beyond Repair
greenville, South Carolinajmp28grN/Adoesn't seem to have any power. no displays or codeBeyond Repair
Waxhaw, North CarolinaJSP28GOP3BGNot sureTimer and clock work but bake and broil do not come on - when you push the buttons the clock just flashesAwaiting receipt of timer
Oakland, California911.4652091NoneBake, Broil and Clean no heat to elementsAwaiting receipt of timer
Dunlow, West Virginia911.4652090F2F2 keeps coming on whether the oven is on or offAwaiting receipt of timer
Golden, ColoradoJMP28GOR1F2 and F3Oven turns off and gives an F2 or F3 error code. I replaced the temp sensor about a year ago and this did not fix problem. It has progressively gotten worse where you can only use the oven for 10 minutes or so then it errors out and turns off. Does not effect the stove top...it works fine. Thanks for your help. Greg Whitson 303-271-0151Repaired
Sims, North CarolinaJSP26GOP3WHF11?Sending this GE clock for repair. Also sending 6 more electronic clocks for you to buy at $10 each. Apply credit to final bill for the GE clock. Any questions, call 252-291-9106 and ask for Tony. Thanks! PS If GE clock cannot be repaired, I don't want it back, but you can buy it for $10 right?Beyond Repair
Salisbury, MarylandJ-RP24GOP1BGF-1Failed transistor in control. F 1 code cannot be cancelled. Please notify me if the timer cannot be repaired at my home number 1-410-742-6612.Beyond Repair
Verona, New YorkJMP31WOR1WHNoneCurrently there is no failure code. The other day it tripped the breaker while using the oven then it started doing the same while using the burners. If I reset the breaker it will work for awhile then trip again. You repaired it once in Feb of 2014. I'm uncertain if its the timer but thought it a good place to start. Do you have one available for exchange or does it sound like its repairable.Awaiting receipt of timer
Arvada, Colorado911.4832590N/Atrying to bake, relays click then goes out of BakeAwaiting receipt of timer
Howell, MichiganJRP24GOP2BGF1 or F7oven will not heat up past about 160 or 200 degreesAwaiting receipt of timer
stilwell, Kansasgeblinks no heat clockclock blinks and no heat when set.Repaired
stilwell, Kansasgeblinks no heat clockclock blinks and no heat when set.Repaired
flowery branch, Georgiaf1flashes F1Repaired