ERC14800RP General Electric Range/Stove/Oven Timer Repair

Failure codes, problems, and resolutions for General Electric timer model # ERC14800RP

General Electric (GE) ERCs and General Electric (GE) stove clocks and timers Manufacturer :  General Electric
Part Number :  ERC14800RP
Appliance Type :  Range/Stove/Oven
Color : 
Description :  Electronic Range/Oven Timer

Do you have a failed General Electric ERC14800RP timer?
Click here:

We can repair or replace your faulty ERC14800RP timer.
Request Appliance Timer Service

Recent Service Requests for General Electric Part Number ERC14800RP

CityModel NumberFailure CodeProblem DescriptionResolution
Pine City, New Yorkjkp16gov1bbno codewhen put into any heating mode it starts to heat then shuts down and goes back to time of day if I try again it won't even go into the heat mode, just stays on the time of day. I have to turn the power off to the oven then this cycle starts againAwaiting receipt of timer
Pine City, New Yorkjkp16gov1bbno codeoven comes on then shuts down after 30 seconds and will not turn back onAwaiting receipt of timer
Granby, QuebecJckp16gp-2F2The oven shut offAwaiting receipt of timer
BURNABY, British ColumbiaNoneNo heat from bake/broil/convection elements (convection fan will come on as appropriate). L1 power to elements reads 120V as appropriate. There is 120V L2 in to the control board, but no power out to elements when turned on.Awaiting receipt of timer
Molino, FloridaJTP17wot1wwOven comes on shuts Oven comes on for approximately 30 seconds then shuts down.Repaired
Quebec, QuebecJCKP16GP-4F1When oven is shut off F1 Code appears and oven beeps. When oven is on will heat up partially (to about 280F) then oven shuts off and F1 code re-appearsRepaired
Panama City, FloridaJkp17w011wwN/ATimer starts preheat then shuts off after 1 minuteAwaiting receipt of timer
Montcalm, QuebecJCTP16GV2BBF3F3 error code was intermittent for the past year, but now is always on. Can't use oven. I have checked resistance of temperature sensor, and the sensor circuit and both are at 1090 Ohms, so should be OK. My limit switch has also recently failed, so I have temporarily replaced it with a mechanical switch to turn on the cooling fan when using the oven. Switch part from GE is: WB24K5126. Might you have this in stock too. Otherwise I can get it from GE. ThanksAwaiting receipt of timer
VILLAGE OF PALMETTO BAY, FloridaJKP16G0V1BBnone (blank)display went blank after power surge during Hurricane IrmaAwaiting receipt of timer
Granite Falls, Washington9114703592N/AI just want the partAwaiting receipt of timer
Montreal, QuebecJCKP16GS-1f2/f3/f8The oven is doing mostly f3 and sometimes f2 and f8 error code intermittently. The temp sensor is okay(1100 ohms at room temp)Repaired
waterbury, ConnecticutJKP17WV1WWF1When oven is shut off F1 Code appears and oven beeps. no problems with self clean or bakingAwaiting receipt of timer
Garden city, IdahoJtp16gtNoneOven simply turns off without heat.Repaired
Garden city, IdahoF1Oven shuts downRepaired
Hamilton, New JerseyKP16GOT2BBNO CODETurn it on set temperature fan comes on and after 20 to 30 seconds everything gets cancelled. I already check the elements and the sensor with a multimeter and all of them have continuity. I called here and explain the problem and someone toll me was the control board.Awaiting receipt of timer
New Westminster, British ColumbiaJCKP17WP-RPF1When oven is shut off F1 Code appears and oven beeps. When oven is on will heat up partially (to about 280F) then oven shuts off and F1 code re-appears.Repaired
Gresham, OregonF-1Unit just went out. It controls all features on the oven. Other numbers on this unit are: RP: 346532 and GE: WB27K5046 SN: 2309 and LBL 18-167-18.Awaiting receipt of timer