9781980 Whirlpool/KitchenAid Range (Stove, Oven) Timer Repair

DESKTOP Failure codes, problems, and resolutions for Whirlpool/KitchenAid timer model # 9781980

Whirlpool ERCs and Whirlpool stove clocks and timersKitchen Aid ERCs and Kitchen Aid stove clocks and timers Manufacturer :  Whirlpool/KitchenAid
Part Number :  9781980
Appliance Type :  Range (Stove, Oven)
Color : 
Description :  Electronic control assembly

 
 
Do you have a failed Whirlpool/KitchenAid 9781980 timer?
Click here:

We can repair or replace your faulty 9781980 timer.
Request Appliance Timer Service

Recent Service Requests for Whirlpool/KitchenAid Part Number 9781980

CityModel NumberFailure CodeProblem DescriptionResolution
Quincy, MissouriN/AWater spilled over onto control board and smoked. Doesn’t workAwaiting receipt of timer
TORRANCE, CaliforniaKGST307HBS4"PROBE" LIGHT ONAfter 19 years with no issues, the temperature "probe" light turned on, but the "probe" is not insert in the outlet. I've tried everything to reset it, but to no avail. Can you repair or do you have a NEW one to replace mine? Thanks!Awaiting receipt of timer
Richmond, British ColumbiaN/AI need a 9781980 control boardAwaiting receipt of timer
Whitby, OntarioYKGST307HB4N/AI have no backing power the backing relay is all black burned out no power at the igniter,if you can fix it I can send it but a reconditioned one would be a faster option.thank youRepaired
whitby, OntarioYKGST307H4BN/AAll functions work except the Backing mode,the bake relay is burned out(Black),please check the complete board.Repaired
Revelstoke, British ColumbiaKGRT607unknownIt is as if the buttons are being pressed on their own. Bake will not turn on. Convection only will turn on and then will not stay on as buttons are being pressed on their own.Awaiting receipt of timer
London, OntarioYKESC307HS6N/ACOOKTOP WORKS, OVEN CONTROL IS FUNCTIONING BUT INCREASE IN TEMP WHEN IN BAKE, BROIL MODE.<br /> SERVICE TECH BELIEVES DOUBLE RELAY IS NOT RESPONDING.Repaired
Phoenix, ArizonaKERC607HBS4NoneLower hidden bake element fried. Replaced element but also discovered electronic timer board output voltage for element not present. Board relay contacts for element appear burned. Upper bake elements (bake and broil) work fine.Repaired
Indianapolis, IndianaN/ANot properly heatingAwaiting receipt of timer
Thetis Island, British Columbiaykgrt607hb6N/Ano responce on touch padAwaiting receipt of timer
Hillsboro, WisconsinKERC607HB T4N/AMy Control Board was fryed by a repair technition-it can't be repaired I need a replacement.Replaced with reconditioned timer
Eagle River, WisconsinKitchen Aid SuperbaN/AI believe the unit failed after a lightning storm, it shows a part that appears to be damages (burnt)Replaced with reconditioned timer
Pickering, OntarioYKESC307HM4N/AOven not heating up, checked the elements and the bake element was blown. Replaced the bake element, now the bake element and the convection element do not work. Broil elements work fine.Repaired
London, Ontarioykgrt607ht3N/Aexisting board will not accept all numbers entered on keypad with some erratic results. Have tried replacement console touch pad with no improvement. Started to fail after an over self-clean cycle.Awaiting receipt of timer
Rogers City, MichiganKGST307 HBT4no power at allOn arrival I found a mouse stuck to board. Not sure it caused the failure, could not get any power through board no display but I had power to board.Repaired
CATAULA, GeorgiaKESC307HBS5N/ASERVICE TEX SAID I NEED THE PANLE PART NUMBER 9781980Replaced with reconditioned timer
Saint-Alphonse Rodriguez, QuébecYKGST307HS5NO FAILURE CODECONVECTION FAN INOP, I BYPASS IT AND THE FAN TURN, I HAVE NO POWER FROM THE BOARD. SOMETIMES THE OVEN FAIL TO IGNITE, I DO A RESET AND THE OVEN RAISE IN TEMPERATURE.Replaced with reconditioned timer
Richmond Hill, OntarioYkesc307hs4N/Aoven elements not workingAwaiting receipt of timer
SUDBURY, OntarioYKESC307HW8N/ADISPLAY LIGHTS DO NOT WORK BUT ALL FEATURES WORK ON THE RANGE. TECHNICIAN SAID P/N 9781980 IS FAULTYAwaiting receipt of timer
VALLEYFIELD, QuébecN/Ado not workReplaced with reconditioned timer