| Dutton, Ontario | | N/A | Board is blown | Repaired |
| Whitecourt, Alberta | ykerc507hs4 | f3e2 | oven shuts off. says to hot | Awaiting receipt of timer |
| Bennett, Colorado | KERC507HWH3 | TORN RIBBON | THE RIBBON IS TORN & WE NEED A REPLACEMENT. | Awaiting receipt of timer |
| sac city, Iowa | kerc507hbs3 | pf and clock doesn't | oven won't come on and display is very faint | Awaiting receipt of timer |
| SEYMOUR, Connecticut | kerc507hb3 | f2 | oven shut off early and can't start for another 20 minutes | Awaiting receipt of timer |
| Trevor, Wisconsin | KERC507HBT0 | N/A | Timer beeps then there is no light on clock | Awaiting receipt of timer |
| Idaho Falls, Idaho | KERC 507HWH3 | n/a | timer stopped working completely. repair person resoldered a few spots and still not working. However, when they gently applied a little torque to the board (gentle twisting) it would work, then stop when the torque was released. | Awaiting receipt of timer |
| Severn, Ontario | YKERC507HS4 | F2E5 | Have been getting error code intermittently but not while in use for the last year but easily cleared by hitting cancel button. Yesterday while trying to use oven, code kept displaying and cancelling all operations of oven. When I tried to clear using cancel button and then restart oven, code would reappear and shut oven off. | Awaiting receipt of timer |
| Kimberley, British Columbia | Ykerc507hw2 | F5E1 | Shuts down displays code | Timer inspected, no repairs necessary |
| Seymour, Connecticut | KERC507HBS3 | N/A | Over roast shut off in the middle of the before end off timer cannot restart until about 30 minutes later. Roast left uncooked | Awaiting receipt of timer |
| Corbeil, Ontario | ykerc507hw4 | none | oven will shut off while baking in normal setting, it seems to be more so when on convection setting, display goes blank and after a few minutes the 'PF' indication appears, sometimes all data on the display will appear for 1 or 2 seconds after the blank screen, cannot determine any error codes
oven will operate normally again once cooled own but will shut off again intermittently, oven will not sustain 'clean' operation | Repaired |
| Queensville, Ontario | YKERC507HS4 | none | Bake element failed, and was replaced. Oven now does not heat properly -shows 350 when actual temp is only 225 (measured with separate thermometer). Replaced oven sensor 8053344, still under heats. Only part left to change is control board (?) -discontinued. | Awaiting receipt of timer |
| Etobicoke, Ontario | YKERC507 | F2E0 | NON OF THE BUTTON FUTURES WORK.
SOMETIMES IT JUST START BEEPING, HOWEVER, DOES NOT RESPOND TO CONTROL PAD. | Awaiting receipt of timer |
| Ottawa, Ontario | YKERC507HB4 | N/A | Bake element blew, replaced it and now doesn't turn on. Repair man said its the control / circuit board...looking to buy refurbished or new board.
Can you help?? Last resort would be a repair | Repaired |
| Barrie, Ontario | Ykerc507hs4 | Tested by tech | Hidden bake element does not get full power rendering the oven useless | Repaired |
| barrie, Ontario | | N/A | hidden backe element is not getting full power | Repaired |
| Edmonton, Alberta | YKERC507HS4 | F4E1 | The appliance would have the probe light came on, initially intermittently but got more and more frequent. The last couple of weeks, it started getting the F4E1 error which would stop the oven. Had repairman came to check it, he inspected the temperature probe and the wiring all the way to the control board. He said everything was good except for the control board which he could no longer get replacement for. | Repaired |
| Kaslo, British Columbia | YKERS507HW2 | ? | I don't recall a failure code. There was a loud pop, and then the smell of electrical fire / singe. | Repaired |
| Collingwood, Ontario | YKERC507HW | N/A | Oven Bulb SHORTED OUT -RESULT NO POWER TO OVEN BULBS & Self Clean no longer works | Awaiting receipt of timer |
| Edmonton, Alberta | Superba | F4E1 | This controller was repaired by your shop last July for exactly the same problem. It is still under warranty, Invoice number was 108110.
It worked perfectly for the first few months and then the probe light started coming on intermittently when teh probe was not there. The last couple days, that F4E1 error code showed up whenever we tried to start the oven. The oven would not start because of that error. | Beyond Repair |
Established in
