7601P51060 Jenn-Air Range/Stove/Oven Timer Repair |
Failure codes, problems, and resolutions for Jenn-Air timer model # 7601P51060 |
![Jenn Air ERCs and Jenn Air stove clocks and timers]() |
Manufacturer : |
Jenn-Air |
| Part Number : |
7601P51060 |
| Appliance Type : |
Range/Stove/Oven |
| Color : |
|
| Description : |
Electronic Range/Oven Timer |
|
Do you have a failed Jenn-Air 7601P51060 timer?
Click here:
We can repair or replace your faulty 7601P51060 timer. |
![Request Appliance Timer Service]() |
Recent Service Requests for Jenn-Air Part Number 7601P51060| City | Model Number | Failure Code | Problem Description | Resolution |
|---|
| Nelson, British Columbia | SVD48600PC | none | Cannot set above 350 degrees on bake setting. | Repaired | | East Longmeadow, Massachusetts | SVD48600p | NA | Worked fine besides the area where turn up or lower the temperature/time. | Awaiting receipt of timer | | Snohomish, Washington | SVD48600P | Rapid clicking relay | Started by oven not getting to set temp all the time then one day relay stated chattering. This timer was new old stock that I got a few years ago to replace the original that had F3 code after 30 minutes of use. Reinstalled that original and everything works as normal just get the F3 after 30 minutes or so. | Beyond Repair | | Indianapolis, Indiana | Svd48600p | Cutting off | Turn off, clock keeps blinking | Awaiting receipt of timer | | McHenry, Illinois | | N/A | Started making an audible buzzing noise. Was not in use at the time. It has since stopped functioning. | Repaired | | TIny, Ontario | SVD48600PC | Unknown | Timer function however oven will not heat up on anything except one heating function, Bake only, functions not working are convections, both settings heats to like 159 and stops. Bake function seems to work will come to temperature slowly. I had a service technician look at the oven and said the timer was broken and he could not get parts. All other functions of the oven and timer were checked and functioning. | Repaired | | Greenfield, Indiana | SVD48600P | There was no failure | No longer will show anything in viewer window. Having another part of the stove repaired (lower relay). If this cannot be fixed I would like to buy a reconditioned timer or a new timer whichever you may have. | Repaired | | laval, Quebec | | Timer does not light | this timer does not light up. it has failed many times before and been repaired. I would like to purchase a reconditioned timer. | Beyond Repair | | Lake Oswego, Oregon | SVD48600P | None, temp buttons n | TEMP UP AND DOWN BUTTONS NOT WORKING, ALL ELSE IS FUNCTIONAL | Repaired | | Hammonds Plains, Nova Scotia | SVD48600PC | F3 and F5 | The timer keeps coming up F3 and F5 codes and self clean does not work | Repaired | | Salt Lake City, Utah | SVD48600P | None Indicated | Bake and broil elements do not heat up. Everything on Control Panel appears to work. No fault codes are indicated. Can turn bake/broil on and you hear clicking and a preheat temp of 100 degrees is indicated. The elements never heat up though and the temperature stays at an indicated 100 degrees. Have verified that proper voltage is flowing from outlet, elements tested for continuity along with temperature sensor and high limit thermostat. All tested as working correctly. Therefore it would seem the timer/control panel has some sort of failure and is not completing the circuit to allow electricity to flow to the elements | Repaired | | Mead, Washington | SVD48600P | F5 | Oven will not heat up sits at 100 degrees. ( Elements ok, relay board replaced, high temp fuse replace.) | Repaired |
|
Established in
