4452444 Whirlpool/KitchenAid Range (Stove, Oven) Timer Repair

Failure codes, problems, and resolutions for Whirlpool/KitchenAid timer model # 4452444

Whirlpool ERCs and Whirlpool stove clocks and timersKitchen Aid ERCs and Kitchen Aid stove clocks and timers Manufacturer :  Whirlpool/KitchenAid
Part Number :  4452444
Appliance Type :  Range (Stove, Oven)
Color : 
Description :  Control zodiac

Do you have a failed Whirlpool/KitchenAid 4452444 timer?
Click here:

We can repair or replace your faulty 4452444 timer.
Request Appliance Timer Service

Recent Service Requests for Whirlpool/KitchenAid Part Number 4452444

CityModel NumberFailure CodeProblem DescriptionResolution
Miami, FloridaOven control boardN/ANo workingAwaiting receipt of timer
High River, Albertakdrp407hss4f2oven element stay on door lock and f2 error code showRepaired
AURORA, Coloradokdrp407hss4pfNot accepting inputs after power failure. opening up the oven and disconnecting power to the timer may advance the message screen from 'pf' to '__:__', but no further and still no inputs accepted.Repaired
AURORA, Coloradokdrp407hss4pfoven not responding to input after power failure - stuck on pf screen.Repaired
Billings, MissouriKdrp407hss09PFPF appears and will not clear.Awaiting receipt of timer
Portland, Oregonkdpr407hss01N/AControl panel selection display normally, but no response at relay board.Awaiting receipt of timer
Ancaster, OntarioKDRP407HSS4noneThe temperature/time setting dial intermittently stops working. At times cycling power will make it work again. Would prefer to purchase a reconditioned unit. If reconditioned board is not available please advise what the turn around time would be once you receive the board. Have already replaced oven control board 8186394 and display module WP4452999.Awaiting receipt of timer
Oakville, OntarioKDRP407HSS4no powerClock went out and oven is not working. Gas top still works. service tech said is the control module. opened up lid and the computer module has some burnt out spots. Thanks RobBeyond Repair
La Jolla, CaliforniaKDRP407HSS10PFAfter a planned power outage by our utility company, the error code "PF" came up. The electric oven hasn't worked since. In order to send the control board to you, I might need some guidance to remove it.This is the only instructions I could find: https://www.searspartsdirect.com/diy/repair-guide/how-to-replace-a-range-relay-control-boardAwaiting receipt of timer
Comox, British ColumbiaKDRP 407HSS3F02?Gas oven control (bottom of the oven?). When oven powered up (tried turning off breaker repeatedly) would not perform requested commands, just went immediately to broil & locked oven door. Similar to issue on the problems page for this part no.Awaiting receipt of timer
Gibsons, British ColumbiaKDRP407HSS4F 02This is an oven control board. I turned on the oven and when I went to open the door it was locked. I turned the power off at the breaker and the door wouldn't open until the oven cooled. I tried powering the stove up a couple times, each time the broiler element came on and stayed on. The fault code on the display was F 02, welded element relays. When we were taking the board out two pins broke off, JP22, JP21 that need to be replaced. I will include the wiring schematic, please return it with the repaired control board. If you have any questions please call 604 989-1169.Repaired
Aurora, OntarioKDRP407HSS09F 02Initial symptom - when attempting to heat an item, oven would automatically change to self clean mode - appliance had to be unplugged to allow for cool down & unlocking of oven door - subsequent attempts at use of oven resulted in the same situation until finally the oven would not operate at all - the failure code listed above was always presentBeyond Repair