3169256 Whirlpool Range (Stove, Oven) Timer Repair

Failure codes, problems, and resolutions for Whirlpool timer model # 3169256

Whirlpool ERCs and Whirlpool stove clocks and timers Manufacturer :  Whirlpool
Part Number :  3169256
Appliance Type :  Range (Stove, Oven)
Color : 
Description :  Electronic oven control assembly black (part number 3169256 replaced with 3169258)

Do you have a failed Whirlpool 3169256 timer?
Click here:

We can repair or replace your faulty 3169256 timer.
Request Appliance Timer Service

Recent Service Requests for Whirlpool Part Number 3169256

CityModel NumberFailure CodeProblem DescriptionResolution
Lufkin, TexasRs675pxyhF1Oven won't work.if you select any feature.nothing happens,it just says F1 on the display screenAwaiting receipt of timer
International Falls, MinnesotaRF396PXYB 1noneThe clock will not hold time. The oven does not heat to the desired temperature, both elements work. It cycles on and off just not at the proper temperatures. I broke a tab off while unhooking, its on a wire going to the element off the smaller coil.Repaired
cedar creek, NebraskaRB270PXBB0n/aNeither upper oven elements (the broil or the bake) will heat beyond 190 degrees.Awaiting receipt of timer
Corpus Christi, TexasRS6755XYNF1Fi Failure code about 30 seconds after starting any type of oven cycleAwaiting receipt of timer
caracasRS696PXBB2N/AI moved to my new home and when the tecnitian was installing my oven he caused a short circuit and smoke came out of the electronic control card. since then the oven does not work but the top counter it is working fine. can you find a new replacement or it can only be repair?Awaiting receipt of timer
Pilot Point, TexasRB760PXBB2no power at allafter running self clean cycle, timer shut off without any display, no longer showed power, oven can not be turned on.Repaired
Marlborough, New Hampshirerb270pxbb0N/Ashorted outRepaired
Plains, TexasRB270PXBBPFOven will not turn on.Beyond Repair
Melbourne, FloridaRF396PXYB5F3F3 Error cord, temp sensor measures 1000 to 1100 ohms on the connector that attches to board. Replaced LM224 and 2N4403 which seems to go to input on pin 13 or 14. Error still apeared after replacement parts.Beyond Repair