| Springfield, Tennessee | 790.94453700 | N/A | broiler baking will not come on | Awaiting receipt of timer |
| Chilliwack, British Columbia | 970-660132 | Broiler does note wo | Broiler is not working, we have have th 3164627 PCB--0046 Rev.F We local appliance tech confirm the problem is with the Oven Control Board 3164627 PCB--0046 Rev.F | Repaired |
| Richmond, Texas | 79048093 | None | Oven heats to temp and then powers off completely. Will not power on until oven is cold.
Removed board serial number 31524824 - found a scorch mark on board in R1 area.
When oven functions it will work in bake mode, and power off intermittently, but powers off in any convection mo | Awaiting receipt of timer |
| Brighton, Colorado | Unknown | F10 I think, overhea | Burned at PD5 Terminal. Oven overheats | Repaired |
| campbell river, British Columbia | 970c6533 | N/A | relay for bottom element fried. doesnt shut off | Awaiting receipt of timer |
| Boucherville, Quebec | | N/A | the oven stopped heating properly. it seems the broil element doesnt heat. however I tested the element and it is ok. I`m suspecting the board is damaged as I see some sign of burned spot. | Awaiting receipt of timer |
| Rifle, Colorado | 790.97453800 | F-10 | Error code f10 | Awaiting receipt of timer |
| Calgary, Alberta | Kenmore C6484 or 970-6876 | F10 | Ran self clean cycle one week ago. Ever since the oven took a long time (45-60 min) to come up to temperature. Turned on oven to convention roast. Oven wouldn’t regulate heat and eventually coded from too high temperature. R1 on circuit board is burnt. | Awaiting receipt of timer |
| Whitby, Ontario | Elite | N/A | Board is burnt beyond repair. | Awaiting receipt of timer |
| L'Ancienne-Lorette, Quebec | C970-440991 | no code | Bake element won't heat up, PCB do not transfer power to the element. Bake element tested OK, temp. probe new. | Awaiting receipt of timer |
| Nominingue, Quebec | 970-678930 | F 10 | oven over-heating untill failure code appears
after reset appliance oven back working but don't kepp heating after pre-heat session
* all elements fonctionnals | Repaired |
| oak lake, Manitoba | | N/A | I have fault code F10 "Runaway Temperature", Resistor R1 is visibly burnt. | Awaiting receipt of timer |
| Montreal, Quebec | 970-687231 | F10 | F10 error code. oven could not regulate temperature. temp probe tests fine. burnt node on pcb board. | Repaired |
| St. Catharines, Ontario | 970-6784 | F10 | Oven overheat, F10 code, electrical burn out or short on relay board | Awaiting receipt of timer |
| Dorval, Quebec | cgef3055mff | f10 | F10 | Awaiting receipt of timer |
| Fernie, British Columbia | | N/A | Bake and broil don't work | Awaiting receipt of timer |
| Belleville, Ontario | cgef3055kfa | F10 | I have fault code F10 "Runaway Temperature", Resistor R1 is visibly burnt. Otherwise, appliance works perfect.
Replaced RTD also. | Repaired |
| Mississauga, Ontario | 970-678533 | N/A | Burnt. Also oven temperature is faulty (no heat control) | Awaiting receipt of timer |
Established in
