| Cardston, Alberta | | N/A | broil doesnt work | Awaiting receipt of timer |
| Canon, Georgia | PLCS389ECF | N/A | Timer Board is dead power to stove but no lights on clock timer | Awaiting receipt of timer |
| Hartfield, Virginia | PLCS389ECB | N/A | Oven will not hold temperature & is lower than setting. Temp does not stay fixed. | Awaiting receipt of timer |
| Burlington, Ontario | CPCS389EC2 | N/A | The Broil function of the control board doesn't function. Everything works fine with exception of the broil function. I have tested the wiring and element which both work fine so I have narrowed the problem to the control board. When the broil function the control board makes a humming noise and the element doesn't heat.
If you require additional information please contact me .
Thank you,
Dan Marlatt | Repaired |
| Rockwood, Ontario | CPCS389EC6 | N/A | Broiler will not heat. Buzzing from the control panel when the broiler element tries to run. | Awaiting receipt of timer |
| Dardenne Prairie, Missouri | PLCS389ECD | none | broiler stopped working and there is a buzzing sound when the oven is heating. Local repair company diagnosed the problem as needing part noted above but the part is no longer availble. | Awaiting receipt of timer |
| Bragg Creek, Alberta | CPCS389EC2 | None | The unit is non-responsive - totally black, no lights, nothing. I confirmed that there is power to the unit before removing. | Repaired |
| Winnipeg, Manitoba | CPCS389EC3 | N/A | The broiler on our Frigidaire professional series range only works intermittently and when not working there is a humming sound coming from behind the control panel. If you knock on the control panel, it sometimes stops the humming and the broiler works so likely a stuck relay. | Repaired |
| Laval, Quebec | PGLEF385ES5 | none | The Broil function of the control board doesn't work. Everything works fine with exception of the broil function. I have tested the wiring and element which both work fine so I have narrowed the problem to the control board. When the broil function the control board makes a buzzing noise and the element doesn't heat. | Repaired |
| delta, British Columbia | cpcs389ec4 | N/A | humming when off. top broiler element doesn't come on when selected and there is a different humming sound. | Repaired |
| Winnipeg, Manitoba | CPCS389EC6 | No failure code | Oven does not heat up. Appliance repair man checked a number of things. | Repaired |
| Calgary, Alberta | cpcs389ec6 | N/A | I was changing the oven light bulb. As I unscrewed it, the bulb separated from the bulb base and shorted out. The control went blank. Unplugging the range did not reset it | Beyond Repair |
| St Andrews, New Brunswick | CPCS389EC5 | None | Bake element will not come on. Replaced element. Temp probe tested OK. | Repaired |
| Edmonton, Alberta | CPCS389EC5 | relais for grill doe | relais for broiler doesn't work
relais sticks and humms. | Repaired |
| St philippe, Quebec | Cpcs389ec5 | Bake no go, dblb int | Bake never works and broil is intermittent at double line break relay. Temperature was ok before failure. | Repaired |
| Moscow, Idaho | PLCS389EB | N/A | Visible burnt area on board. Oven elements do not come on . All other read outs work. Clock, bake, broil etc. | Repaired |
| Maple Ridge, British Columbia | CPCS 389 EC2 | N/A | Noticed a humming sound when oven was turned on (first use after cleaning ) .
Noticed the broil element was not working so replaced it but still did not work and still hummed .
Called a technician - said timer needed replacing ( relay ? ) but the part is no longer being manufactured . | Repaired |
| Caledon East, Ontario | cpcs389ec2 | N/A | screen is blank, no display | Beyond Repair |
| Stouffville, Ontario | CPCS389EC2 | unit is burned | Due to a power surge, the control board is burned. The stove is working and power is connected. | Beyond Repair |
| St.Thomas, Ontario | Frigidaire professional series - CPCS389EC5 | None | When stove is placed on bake cycle, lower element will warm only and not come up to temperature. (Ex.400 degrees). Temp sensor, element all good. 3 discoloured wiring connections in plastic harness observed. Jumper wires installed to diagnos if that was the issue, initial problem remained. Control board fail is the diagnosis | Repaired |
Established in
