7601P20660 Magic Chef Range/Stove/Oven Timer

Failure codes, problems, and resolutions for Magic Chef timer model # 7601P20660

Magic Chef ERCs and Magic Chef stove clocks and timers Manufacturer :  Magic Chef
Part Number :  7601P20660
Appliance Type :  Range/Stove/Oven
Color : 
Description :  Electronic Range/Oven Timer

 
 
Do you have a failed Magic Chef 7601P20660 timer?
Click here:

We can repair or replace your faulty 7601P20660 timer.
Request Appliance Timer Service

Recent Service Requests for Magic Chef Part Number 7601P20660

CityManufacturerModel NumberFailure CodeProblem DescriptionResolution
burlington, New JerseyMagic Chef6498VRANoneAwaiting receipt of timer
burlington, New JerseyMagic Chef6498VRANoneAwaiting receipt of timer
Towaco, New JerseyMaytagMaytag 6498VTAN/AThe oven does not reach the proper temperature, the sensor has been replaced and the ohms are also correct.Repaired
Santa Clarita, CaliforniaMagic Chef6498XTWF1F1 code but will function w/ temperature readout increasing degrees rapidly & inaccuratelyReplaced with reconditioned timer
burlington, New JerseyMagic Chef6498vranonewon,t heat the ovenReplaced with reconditioned timer
burlington, New JerseyMagic Chef6498VRANoneAwaiting receipt of timer
burlington, New JerseyMagic Chef6498 vranoneoven won"t heat up to tempertureReplaced with reconditioned timer
burlington, New JerseyMagic Chef6498VRANoneAwaiting receipt of timer
burlington, New JerseyMagic Chef6498VRANoneAwaiting receipt of timer
burlington, New JerseyMagic Chef6498VRANoneAwaiting receipt of timer
Grandville, MichiganMagic Chef 6498VTAoven shuts off premawhen I set a bake temp, the "countup" starts at 240 degrees and lights the burner, but in short order it counts up to the set temp, but the actual temp on my oven thermometer barely exceeds 100 degrees before the burner shuts down.Repaired
Scarsdale, New YorkMaytagchg9800aaeN/AIf not in stock let me know and I will send one in for repair. Existing timer displays wrong temperature, oven never makes proper temperature display reads 400 degrees F but oven is maybe 100 degrees F.Replaced with reconditioned timer
Gales Ferry, ConnecticutMagic Chef6498VTVN/AControl board is not allowing power to gas valveReplaced with reconditioned timer
old bridge, New JerseyMagic Chef6498vtaN/Atemp is off 100 degrees checked ohms on temp sensor okReplaced with reconditioned timer
Pembroke, OntarioMagic Chef6498TVN/Aoven does not reach temp. If set at 550, it may only reach 250.Repaired
Sheho, SaskatchewanMagic ChefF1It will start beeping and even if the power is turned off and the stove reset it will start the beeping again with error code F1Awaiting receipt of timer
Idaho Springs, ColoradoMagic Chef745XTA Chateau GAS OvenNoneMagic Chef Chateau is a dual oven model, the top oven operates independently from the control board PN 7601P206-60. The lower oven is controlled by the oven control board.
The oven control board does not allow the lower oven to up heat properly, If oven is set for 350 degrees, gas burners come on and oven will heat to 125 degrees and signal on the oven control board will sound to indicate that oven temp of 350 has been reached. When oven is set to highest heat setting of 450 degrees, oven will heat to only 250 degrees. The control board does not throw any error codes.
Repaired
Golden, ColoradoMagic Chef6498VTVF1Periodically get the F1 fault code displayed.Awaiting receipt of timer
Morganville, New JerseyMagic Chef6498VTAF-1F1 code. Gas Range continues to beep.Awaiting receipt of timer
University Heights, OhioMagic Chef6498XTWN/A1. Oven temperature is about 70 degrees below that selected.
2. Beeper goes off in the middle of the night. It is currently cut.
3. Display occasionally fades to black, until you whack it.
Awaiting receipt of timer
Philadelphia, PennsylvaniaMagic Chef7458XTWnoneOven has 2 burners in lower unit (broiler and oven). Neither burner operates when controller is set to bake or broil. Ignitors are known to be good, but do not glow when controller is in oven or broiler mode. Oven burners will turn on if oven is placed in self cleaning mode(that's how I know ignitors and gas valves are good). Prior to complete failure, oven would not reach or maintain set temperature.Awaiting receipt of timer
Gatineau, QuébecMagic Chef6498VTVF3Oven does'nt work at all but the top burners work great.Awaiting receipt of timer
porterville, CaliforniaMaytag8498vtaf1oven shuts offAwaiting receipt of timer
Delmar, New YorkMagic ChefMagic Chef 6498VTVF1Oven no longer reaches set temperature (oven thermometer 165F, oven set for 375f). F1 and beeps on display after a few minutes on power. Recently replaced short temperature sensor, lower oven ignitor, and keypad -- no change. Swapped broiler ignitor with lower ignitor -- no change. Lower oven and broiler both fire up, assuming gas valve is okay. Please repair if possible.Repaired
New Hyde park, New YorkMagic Chef6498vtaF5Intermittent beepingAwaiting receipt of timer
Rome, New YorkMagic Chef6498XTSN/AOven will not heatAwaiting receipt of timer
Roseville, MinnesotaMagic Chef6498vtaF5F5 code with no heatAwaiting receipt of timer
New Westminster, British ColumbiaMagic Chef6498VTVf1oven works for 30+ min but flashes F1 code. Unplugging the oven resets the issue and we can cook for another 30 or so minutes then the F1 error returns.Awaiting receipt of timer
Gatineau, QuebecMagic Chef6498VTVNoneOven temperature never exceed 250FRepaired
South Orange, New JerseyMagic Chef6498XVSNAOven and broiler ignitor control does not work. New ignitors have been installed.Awaiting receipt of timer
South Orange, New JerseyMagic Chef6498XVSNAOven and broiler ignitor control does not work. New ignitors have been installed.Awaiting receipt of timer