Failure codes, problems, and resolutions for KitchenAid timer model # 3191106
|Part Number :
|Appliance Type :
|Do you have a failed KitchenAid 3191106 timer?
We can repair or replace your faulty 3191106 timer.
|City||Manufacturer||Model Number||Part Number||Failure Code||Problem Description||Resolution|
|ripley, West Virginia||KitchenAid||kesc307bwh3||3191106||N/A||When attempting to use oven, when one sets the temperature and hits start, the temperature display always shows 260 degrees. The oven is at room temperature and has not been used prior to starting. The oven heat does come on. This is the one that I spoke with Howard about last week. He suggested that I have the temperature sensor and wiring checked for 1500 ohms before sending it to you. I hired the appliance electrician to come out and test it and he did and reported that the sensor and wiring were OK. This the same one that was locked and wouldn't unlock and was sent to you about August of 2009. You unlocked it and said it did not need repair and returned it. It has worked fine since until about 6 months ago. I could not get around to getting it fixed until now, so my wife has done without the oven. You may call me at 304 532 3604, if I may help with more information or decision.|
NOTE: If my control cannot be repaired, please ship a timer-control from inventory.
|Toluca Lake, California||Whirlpool||3191106||1F58||Water boiled over on stove top, entered circuit board. Displayed strange error code, made crackling noises, then display went blank.||Replaced with reconditioned timer|
|miami, Florida||KitchenAid||KESH307BWH1||3191106||F2-E5||start and cancel keys do not work||Awaiting receipt of timer|
|MISSISSAUGA, Ontario||Whirlpool||YKGST307GS0||3191106||N/A||IGNITION WORKING OLDE TIME.(SHOOTING)|
OVEN WORKING ONLY 5 MINUTES
CONTROLLER LIGHT UP OLDE TIME.
|Awaiting receipt of timer|
|Big Flats, New York||KitchenAid||KGRT507BAL2||3191106||N/A||beeping irradically, surface light turning on by itself. set probe temperature is showing, oven is not on.||Awaiting receipt of timer|
|Parksley, Virginia||KitchenAid||kesc307hbt1||3191106||N/A||Lower element in oven not heating. technician checked both elements and found|
|Replaced with reconditioned timer|
|Heltonville, Indiana||KitchenAid||KERC607GBS1||3191106||NO CODE||OVEN WON'T TURN OFF, OVEN WON'T TURN ON, TOUCH CONTROLS DON'T WORK FOR ANY OTHER FUNCTIONS|
ALL SYMPTOMS ARE INTERMITTENT
|Awaiting receipt of timer|
|NORTH YORK, Ontario||KitchenAid||YKESH307HWO||3191106||N/A||OVEN ELEMENT NOT HEATING UP AT ALL DISPLAY PANEL IS WORKING OVEN TEMP AND CLOCK WORK BUT OVEN NOT HEATING UP AT ALL RELAY IS HEARD WHEN START BUTTON IS PRESSED NOTE PRIOR TO THIS CONDITION QUITE OFTEN WHEN OVEN WAS WORKING DISPLAY WOULD GO BLANK AND OVEN SHUTS DOWN DISPLAY AND OVEN RESUMES WORKING AFTER IT COOLS DOWN FOR APPROX 30 OR MORE MINUTES THIS HAS BEEN HAPPENING FOR A LONG PERIOD OF TIME PRIOR TO THIS CONDITION NOW PLEASE ADVISE HAVE SPOKEN TO ONE OF YOUR STAFF ABOUT MY ISSUE AND NOW WILL BE SENDING IT IN AS THIS PART IS NO LONGER AVAILABLE AND NO ONE HERE WANTS TO REPAIR THIS MODEL NUMBER BOARD THANK YOU I CAN BE REACHED OR TEXT MESSAGE AT 416-389-0733||Repaired|
|Littleton, Colorado||KitchenAid||: 3191106||N/A||slow to heat up and oven light blinks||Awaiting receipt of timer|
|Steinbach, Manitoba||KitchenAid||KESC307HBL1||3191106||F5E3||F5 E3 error code. Unable to use oven. Checked power supply to board and polarity. Checked ground. All ok.||Repaired|
|East St Paul, Manitoba||KitchenAid||YKESH307BB0||3191106||N/A||oven does not heat||Awaiting receipt of timer|
|selma, Alabama||KitchenAid||3191106||none||unable to set functions at times, more pronounced as the temperature of the unit increases. sometimes just opening the door and closing will allow operation.||Awaiting receipt of timer|
|Midland, Texas||KitchenAid||KERC607HWH0||3191106||none||For about a year the appliance has often display the letters pf.|
Yesterday the oven spontaneously started the self cleaning cycle including heat.
After cutting power and reapplying power via the circuit breaker, The controller board displayed all lights as if in reset mode and did not extinguish these lights until the power was cut off and reapplied several times
The board appeared then to function properly only after repeatedly entering time and many other settings (never previously asked for).
Now, Today, no heat to oven but surface burners work.
Also today I spoke to Howard who thinks its symptoms indicate the problem is the board itself not the power wire connecting to it and suggested we fill out this form and send the board in for repair.
|Winnipeg, Manitoba||KitchenAid||Kitchen aid superba||3191106||F2E5||Can not use keypad to engage oven features||Awaiting receipt of timer|
|Mechanicsville, Virginia||KitchenAid||kerc607gbt0||3191106||none||Probe temp showing odd numbers ( no Probe attached). will not accept temp input, shows 800 odd as temp set. oven light comes on with out input. etc.||Awaiting receipt of timer|