316462808 Kenmore Range/Stove/Oven Timer

Failure codes, problems, and resolutions for Kenmore timer model # 316462808

Kenmore ERCs and Kenmore stove clocks and timers Manufacturer :  Kenmore
Part Number :  316462808
Appliance Type :  Range/Stove/Oven
Color : 
Description :  Electronic Range/Oven Timer

Do you have a failed Kenmore 316462808 timer?
Click here:

We can repair or replace your faulty 316462808 timer.
Request Appliance Timer Service

Recent Service Requests for Kenmore Part Number 316462808

CityManufacturerModel NumberFailure CodeProblem DescriptionResolution
Saint-Hippolyte, QuebecKenmore970-6785N/ABlown resistor in the middle bottom of the board.
I want to know if my oven may be the cause for what happened or if it is the timer problem.
Georgetown, OntarioFrigidaireC970-678590N/AOven will not heat to temperature. Both elements read 110V when checked. Probe reads 1100 ohms.Repaired
Conception Bay South, Newfoundland and LabradorKenmore970C648530F10my oven will heat up but once it is heated I get a code F10, a beeping noise and my oven shuts off.Awaiting receipt of timer
Mt Uniacke, Nova ScotiaKenmoreC648490N/Abottom element will not heat upAwaiting receipt of timer
trois-rivieres, QuebecKenmore970-687630f10four surchauffeAwaiting receipt of timer
Mt Pearl, Newfoundland and LabradorElectroluxKenmore 970-678630No failure code.Broiler in oven not working. Replaced broil element after fire in oven due to break in old broil element that caused electrical panel breaker to switch off.
No power going to new element from Oven control panel.
Waterloo, OntarioKenmore970678533no code.Everything works except Broiler and baking takes longer to get to baking temperature.... Oven problemRepaired
Cambridge, OntarioKenmore970-687690N/AThe bottom bake element does not come on when the bake button is selected. We replaced the temp sensor and the baking element and it still was a problem. We had a repair tech in who advised it was a control board issue hence our desire to see if it can be fixed.Awaiting receipt of timer
Toronto, OntarioKenmore970-6785n/aOven just heats up well beyond temperature set.Repaired
Port Coquitlam, British ColumbiaKenmore970-678592F10Since moving in to our new house we noticed that the oven was baking our food a lot quicker than we were used to.
After a day or two the F10 error appeared, beeping until the over was switched off at the breaker.
upon opening the back of the over, I can see the circuit board is burnt! When I disconnected all the connectors, the 'Bake' connector came out. And one of the resistors is severely burnt.
Cardigan, Prince Edward IslandKenmore970C648520F10The Relay Board has visible burn marking on it. The system went into overheat error F10Repaired
Owen Sound, OntarioKenmore970-678533NoneThere are 3 burnt terminals on the board for the broilerRepaired
Cardigan, Prince Edward IslandKenmore970-678533F1Temperature rise with no control, visible resistor damage on boardRepaired