Failure codes, problems, and resolutions for General Electric timer model # WB27K5123 |
 |
Manufacturer : |
General Electric |
| Part Number : |
WB27K5123 |
| Appliance Type : |
Range (Stove, Oven) |
| Color : |
|
| Description : |
(part number WB27K5123 replaced with WB27K5190) |
|
Do you have a failed General Electric WB27K5123 timer?
Click here:
We can repair or replace your faulty WB27K5123 timer. |
 |
Recent Service Requests for General Electric Part Number WB27K5123
| City | Manufacturer | Model Number | Failure Code | Problem Description | Resolution |
|---|
| Cincinnati, Ohio | General Electric | Jtp55wov2ww | F1 | The oven will beep and show an F1 error several times a month, but it is getting gradually worse. Can you send part number WB27K5190 that I can use to replace this with. Is this something I can install, or will it require a repair person? I regularly build and repair my computers, so I am well versed with electronics. Please call Jane Dugan at 513-561-9715 or 513-379-1555 with availability and estimate. I can also send my old board in for repair if that is the better option. | Awaiting receipt of timer | | Wentzville, Missouri | GE | | F1 | F1 displayed with continuous beeping. Pressing CLEAR stops beeping and clears F1 momentarily. Setting a baking temp immediately after pressing CLEAR results in normal operation. Pressing CLEAR after baking results in F1 and beeping. Removing power for an extended period and restoring power does not clear F1 and beeping. | Beyond Repair | | Bartlett, Tennessee | General Electric | JKP26G0P4BG | F-1 | F-1 error code with continuous beeping and it will not clear. I turned off the power and get the very same process. | Awaiting receipt of timer | | Bartlett, Tennessee | General Electric | JKP26G0P4BG | F-1 | F-1 error code with continuous beeping and it will not clear. I turned off the power and get the very same process. | Awaiting receipt of timer | | Springfield, Virginia | General Electric | JKP26G0P3BG | None | Wall oven will not reach selected temperature: roughly 230F for 350F selected...340F for 450F selected. Oven heating elements function normally, self-cleaning function operates normally. No fault codes. Replaced oven sensor with no improvement. | Repaired | | CHICO, California | General Electric | JKP26G0P4BG | NO CODE | NOT READING PROPER TEMERATURES | Repaired | | cincinnati, Ohio | General Electric | JGBP35WEW1WW | No readout at all | No readout at all, no oven function, clock etc. Stove top burners are completely functional | Repaired | | Concord, California | General Electric | JKP26G0P4B6 | N/A | oven does not heat to the temp . If you set temp to 350* it heats to about 290* and slowly drops. Link to parts diagram. http://www.partselect.com/PS238171-GE-WB27K5123-USE-GEH-WB27K5190.htm?SourceCode=3&SearchTerm=WB27K5123 | Repaired | | HATTIESBURG, Mississippi | General Electric | JKP27WOP3WG | / | OVEN WON'T HEAT. SAID TO BE DEFECTIVE BY SEARS REPAIR TECHNICIAN | Awaiting receipt of timer | | Silver Spring, Maryland | General Electric | JKP14WOP3WG | No code (older model | Oven will not turn on to bake or broil. When bake button is pushed and temperature set, there is an audible click and the "bake" indicator blinks for a few seconds, then the temperature display reverts to 100 before turning off. Broil also does not work. No heat going to the elements at all. | Awaiting receipt of timer | | Albuquerque, New Mexico | General Electric | jkp13gofzbg | N/A | Lower element doesnt get to temperature set. | Awaiting receipt of timer | | Camarillo, California | General Electric | JKP27WOP3WG | F2 | The oven will not turn off and it is blinking F2 after the oven was turned off. we have to turn the breaker off in order to not have the oven running constantly. | Awaiting receipt of timer | | Littleton, Colorado | General Electric | jkp14wp3wg | F3 | At high or extended oven temperatures get an intermittent F3 code. Oven sensor test good. If board(timer) is cooled ith a fan there is no failure. Suspect a thermister in the board. | Awaiting receipt of timer | | York, Pennsylvania | General Electric | jkp14wop3wg | N/A | Do not have the failure code, but the temperature regulation module is what's affected | Repaired | | PAWTUCKET, Rhode Island | General Electric | JKP27WOP36G | NONE | I REPLACED THE COIL ELEMENT AND SINCE THEN THE OVEN HEATS BUT DOESNT REACH THE DESIRED TEMP. GE REPAIRMAN SAID I NEEDED A NEW TIMER BUT GE DOESNT CARRY THEM SO ID LIKE TO ORDER ONE AND HAVE IT INSTALLED. I PREFER NOT REMOVING MY TIMER AND SENDING IT TO BE REPAIRED, BUT WANT TO BUY A NEW TIMER. | Awaiting receipt of timer |
|
Established in