WB27K5068 General Electric Range (Stove, Oven) Timer Repair |
Failure codes, problems, and resolutions for General Electric timer model # WB27K5068 |
![General Electric (GE) ERCs and General Electric (GE) stove clocks and timers]() |
Manufacturer : |
General Electric |
| Part Number : |
WB27K5068 |
| Appliance Type : |
Range (Stove, Oven) |
| Color : |
|
| Description : |
Electronic clock erc ii control - Discontinued by the manufacturer |
|
Do you have a failed General Electric WB27K5068 timer?
Click here:
We can repair or replace your faulty WB27K5068 timer. |
![Request Appliance Timer Service]() |
Electronic clock erc ii control - Discontinued by the manufacturer timer Part Number WB27K5068 is used in the following appliances |
Recent Service Requests for General Electric Part Number WB27K5068| City | Model Number | Failure Code | Problem Description | Resolution |
|---|
| Des Moines, Washington | JSP26GP1AD | none shown | Replaced sensor, but oven still turns off when 160 degrees lower than temperature displayed. | Repaired | | cedar springs, Michigan | jrp24gp | N/A | oven will not come up to heat. when set to 350 degrees it only reaches 160 degrees. | Repaired | | Parma Hts., Ohio | JSP38GOPIBG | F1 | Error code: F1. Panel beeps constantly. Will not operate any function. | Awaiting receipt of timer | | Decatur, Georgia | JSP31GOP1WH | F1 | range just keeps beeping showing an F1 in digital readout. | Awaiting receipt of timer | | GREENVILLE, Indiana | | F-3 | REPLACED SENSOR TWICE AND DID NOT FIX PROBLEM | Awaiting receipt of timer | | Beverly Hills, California | Jsp28g0p1bg | F-1 | Beeping and flashing F-1 | Awaiting receipt of timer | | MORRISONVILLE, New York | RS744GP1BG | NONE | OVEN IS NOT GETTING TO TEMPERATURE THAT IT IS SET FOR. IF YOU SET FOR 200 IS DOESN'T TURN ON. IF YOU SET FOR 400, IT GETS UP TO APPRX. 200 DEGREES. 510 DEGREES IT GETS UP TO 400-500 DEGREES. | Repaired | | Lavonia, Georgia | JDP36GOP3WH | F1 | FLASHES F1 | Awaiting receipt of timer | | Trussville, Alabama | jsp26g071wh | N/A | broiler element will not turn off, have to shut power at circuit breaker...oven works, range top work...broiler unit turns on by itself and will not turn off | Awaiting receipt of timer | | Old Bethpage, New York | JSP31P1 | F1 | F1 displayed. Constant beeping | Awaiting receipt of timer | | Oak Ridge, Tennessee | jsp38gp | N/A | oven goes to 250 and stops heating | Awaiting receipt of timer | | Boylston, Massachusetts | JSP38GOP1BG | N/A | The temperature of oven is between 100 to 125 degrees lower than set. When timer is used a failure code flashes. | Repaired | | niagaara falls, Ontario | jsp31gp | none | oven temp aprox 70 degrees F low | Repaired | | Boothbay Harbor, Maine | JSP31GOP1WH | N/A | INCORRECT OVEN TEMP | Repaired | | pittford, New York | JDP37GP1 | NONE | Oven will not reach proper temperature. Indicates 400 but is actually 200. The sensor element was checked and the resistance is correct for 200 degrees. A resistance check was done at the ERC board and it also indicated the correct resistance for 200 degrees, so the wiring harness is working properly. I am interested in purchasing a repaired unit if you have it available | Repaired | | Lakeside, Montana | jsp31gop1wh | N/A | clock works but when you go to turn on stove it shuts off after about 15 seconds | Repaired | | Yorktown Heights, New York | GE:JSP260P1 WH | oven heat incorrect | oven temp is satified instantly, stove temp is cool, not to desired setting.
broiler is good.
oven clean sycle is good (both top and bottom heating eliments are heating | Awaiting receipt of timer | | Yorktown, New York | GE: JSP250P1:WH | ??????? | temp control not met | Awaiting receipt of timer | | niagara falls, Ontario | jsp31gp | none | temp 70 degrees low | Repaired | | Tucson, Arizona | J SP26GOP1WH | N/A | Oven when set at max temperature will only achieve approximately 250 degrees. Thermocouple has been replaced. | Repaired |
|
Established in
