Campbellsville, Kentucky | Kenmore | 911 4742996 | F2 F3 | When heated the F2 and /or F3 codes will sound and the oven is turned off. Temperature probe sensor has been replaced and ohms out correctly. The original also ohmed out correctly. After it sits out all night, sometimes it will work. Checked with Fluke meter, temperature is accurate plus 10%. Seems to drop 50 decree and then heats make to temp and is pretty accurate when it is working. You may call 270-403-6919, Scott. | Repaired |
Falls Church, Virginia | General Electric | JRP14 | F1 | F1 fault with beep - persistent. | Beyond Repair |
Linden, Alabama | Kenmore | 9114742994 | F-1 | oven comes on starts to heat up and fault occurs might 5 minutes or 15 | Beyond Repair |
MURRELLS INLET, South Carolina | General Electric | jsp26gp4ad | f-1 | f-1 | Replaced with reconditioned timer |
Marion, Arkansas | General Electric | JSP28GP | F1 | F1 error message | Replaced with reconditioned timer |
Niceville, Florida | Kenmore | 9114552192 | F1 | Per Howard Simons, timer P/N 254318 is in stock and will work in my range | Replaced with reconditioned timer |
BURLESON, Texas | Kenmore | 911.4552092 | F1 | BEEPS AND FLASHES ERROR CODE F1. | Awaiting receipt of timer |
Annapolis, Maryland | General Electric | 911.4132993 | F1 | Continuously beeps F1 error code. Happened once before a few months but quit by itself. Now it won't quit, even after unplugging oven for several hours. | Awaiting receipt of timer |
Boulder, Colorado | General Electric | JSP31GOP4WH | F-1 | F-1 failure code oven will not work. | Beyond Repair |
Minnetonka, Minnesota | General Electric | J MP31WOR2WH | F1 | Blinks F1 code after power has been applied for a minute or two | Repaired |
Rosenberg, Texas | Kenmore | 911.4652092 | ????? | Cannot heat the oven.When setting the desired temp. the timer doesn't start at 100*, just starts at a random temp. and shortly shows the desired temp. but actually does not heat the oven at all. We replaced the elements but the problem still exists. | Repaired |
Mechanicsville, Virginia | General Electric | JMP28G0P1AD | DEAD-NO DISPLAY | Timer Dead-No display. I replaced this timer in 2008. Printed on the box was the part number WB27K5073. When it crapped out last week I noticed on the timer it was
WB27K5107. | Repaired |
West Columbia, South Carolina | General Electric | JDP39W0T1WW | F1 | F1 error and continuous beeping | Repaired |
Highland, Michigan | General Electric | | F1 | F1 code and continuous beeping | Beyond Repair |
Foster, Rhode Island | General Electric | jsp39wot1ww | N/A | Timer is physically damaged beyond repair | Awaiting receipt of timer |
Florence, Alabama | Kenmore | 911.4554590 | F1 | F1 is displayed and it beeps. Beeping will stop if oven is turned on. Oven seems to work properly. If oven is turned off it displays F1 and beeps again. Have to disconnect power to shut off beep. Would like to buy replacement part # WB27K5107 but Sears says it is not available. | Awaiting receipt of timer |
South Windsor, Connecticut | General Electric | JSP38G0T1BB | F1 | F1 code when power is connected. | Beyond Repair |
tupelo, Mississippi | Kenmore | 911.4552092 | N/A | it wouldnt start heating and say it was heated on 350 but it was only around150. i took it out and put it back in then it said latch | Repaired |
Kansas City, Missouri | General Electric | JRP14G | F1 Continuous Chime | Displays Code F1 and the chime will not reset. | Beyond Repair |
Glastonbury, Connecticut | General Electric | JSASAG | F1 | starts beeping and takes a long time to cook. | Awaiting receipt of timer |
tyler, Texas | Kenmore | | N/A | control will set temp and right before preheat unit will reset it itself or you can tap it and control will reset, short somewhere | Repaired |
Rosenberg, Texas | Kenmore | 911.4652092 | ????? | Cannot heat the oven.When setting the desired temp. the timer doesn't start at 100*, just starts at a random temp. and shortly shows the desired temp. but actually does not heat the oven at all. We replaced the elements but the problem still exists. | Repaired |
tupelo, Mississippi | Kenmore | 911.4552092 | N/A | the oven comes on but want reach and maintain the temp. it says its on | Repaired |
Huntsville, Alabama | General Electric | JRP15WOT1WW | F-1 | | Awaiting receipt of timer |
Santa Barbara, California | Kenmore | 91144042592 | F1 | The electronic control unit beeping non stop. | Repaired |
PANAMA CITY BEACH, Florida | General Electric | | N/A | BAKE OPTION WILL NOT COME UP TO TEMP | Repaired |
Tacoma, Washington | General Electric | JDP36GOT1AD | f-1 | nonresponsive / beeps loudly | Beyond Repair |
PANAMA CITY BEACH, Florida | General Electric | | N/A | BAKE OPTION WILL NOT COME UP TO TEMP | Repaired |
Fenton, Missouri | General Electric | JSP31GP4WH | N/A | Oven does not heat above 200 degrees. Repairman said timer is bad | Repaired |
LONGVIEW, Texas | General Electric | JDP39WDR5WH | N/A | First indication was when selecting bake the circuit would drop out within seconds. A second or third try would operate. This progressed to the point that time bake and broil are inoperative. | Repaired |
Cumberland, Rhode Island | Kenmore | 9119652192 | F1 | Oven does not turn on at all | Awaiting receipt of timer |
Everett, Washington | General Electric | JSP39GOS2WG | F1 | Unit gives a continuous beep wit F1 error message.
Initially I am inquiring whether you have a reconditioned unit in stock. If so, how much is it? If not available in stock, what are my options? | Awaiting receipt of timer |
Dalton, Georgia | General Electric | JDP39WOR5WH | None | Actual oven temp will not reach near what panel readout shows it to be. Example: Set oven temp to 450 and 450 will roll up on the display quickly and kick oven off. Actual oven temp will be between 150 & 200 and won't get any hotter | Awaiting receipt of timer |
Walnutport, Pennsylvania | Kenmore | 9114742994 | bake element wont co | all functions operate except Bake!!! | Repaired |
Spfd, Missouri | Kenmore | | F1 | F1 beeping | Awaiting receipt of timer |
Valdosta, Georgia | General Electric | JMP28GOT1AD | F1 | Error code F1 appears on display. Beeping alarm goes off and continues until power is turned off. No oven or timer functions work. Range top still works despite alarm. | Repaired |
Perry, Florida | General Electric | JRP15WOP3WG | F1 | Beep incessantly unless you keep the power off. If you don't turn the oven on within seconds of connecting it to power, it won't turn on, but just keeps beeping with the F code flashing. | Awaiting receipt of timer |
El Nido, California | Kenmore | | None | you can set the oven temperature but then oven temp display shuts off. Oven does not heat up bake or broil. | Repaired |
greenbrier, Tennessee | Sears | | N/A | won't control temp | Awaiting receipt of timer |
PENDLETON, South Carolina | General Electric | JSP26GT1WH | F1 | Beeps with F1 error. Tried to unplug and wait but no help. | Replaced with reconditioned timer |
CINNAMINSON, New Jersey | General Electric | JSP40AS2AG | F1 | Timer shows F1 code and beeps continuously. Only way to stop beeping was to disconnect power. Beeping and F1 error return about 30 seconds after power is restored. | Repaired |
Spfd, Missouri | Kenmore | | F1 | F1 beeping | Awaiting receipt of timer |
north Port, Florida | General Electric | JSP39GS2WG | N/A | temperature wrong on oven even with two new sensors | Repaired |
OWOSSO, Michigan | General Electric | JRP14GOT1BB | F1 | F1 CODE WILL NOT CLEAR. | Repaired |
Renton, Washington | Kenmore | 9914654590 | F-1 | F-1 fault, constant beeping. Tried disconnecting for awhile and powering back up, but problem persists. | Repaired |
Fairview, Pennsylvania | Kenmore | 911.4652192 | f-1 | beep quit and unit quitworking atall | Repaired |
Laurinburg, North Carolina | Kenmore | 911-4554190 | F1 | F1 error | Repaired |
Indian Harbour Beach, Florida | General Electric | JSP26GP4AD | None | PRESENT PROBLEM: When CLEAN, BROIL or BAKE is selected, timer will not go to these modes; other modes work.
FIRST PROBLEM: Selecting CLEAR/OFF would not turn oven off; required to cycle oven circuit breaker in house panel-board to turn oven off. This 1st problem lasted several days, then range returned to normal operation for several days, followed by present problem. | Repaired |
Enfield, Connecticut | General Electric | JSP38GS4BG | F1 | F1 code and beeping. | Repaired |
VERMILION, Ohio | General Electric | JSP40A0S2AG | ?? | NONE OF THE BUTTONS RESPOND EXCEPT THE CLOCK | Repaired |
Fairview, Pennsylvania | Kenmore | 911.4652092 | f-1 | steady beep when oven had been used until it cooled down
then it finally quit heating oven at all | Repaired |
Oklahoma City, Oklahoma | Kenmore | 9114042592 | no code | Temp Sensor has been replaced and oven still does not get to or hold temperature. | Repaired |
Oklahoma City, Oklahoma | Kenmore | 9114042592 | no code | Temp Sensor has been replaced and oven still does not get to or hold temperature. | Repaired |
owosso, Michigan | General Electric | | f1 | f1 code cannot be cleared | Repaired |
Enfield, Connecticut | General Electric | JSP38GGS4BG | F1 | F1 code and beeping | Repaired |
Pierson, Florida | General Electric | JRP14GP4BG | F1 | Beeps constantly and displays an F0 or an F1 error code. Cannot be cleared. | Repaired |
Overland Park, Kansas | General Electric | | F1 | F1 error code and oven beeps | Awaiting receipt of timer |
Richmond Hts, Ohio | Kenmore | 911-4832993 | N/A | Won't stop beeping | Repaired |
Cumming, Georgia | General Electric | JDP39WR | F1 | F1 error code, constantly beeps | Repaired |
SUNBURY, Ohio | Kenmore | 911.4672994 | F1 | F1 failure code, incessant beeping. | Awaiting receipt of timer |
Lexington, North Carolina | General Electric | jsp31gop4wh | display not working | display is not working | Awaiting receipt of timer |
dudley, Georgia | Kenmore | 9114042592 | N/A | oven would not heat | Awaiting receipt of timer |
Arkadelphia, Arkansas | General Electric | JMP28GT1 | None | select bake or broil. oven comes on for few seconds then cuts off. have felt the elements and they start to heat before oven cuts off. the internet research I have found indicates a timer problem, but no error codes. if you do not have a timer for this oven in stock, I can ship mine for repair. Prefer to buy one since its probably faster. Thank you. | Repaired |
Arlington, Virginia | General Electric | Spacemaker | Unknown | Digital readout functions as a timer or clock, but will not turn on heat in oven. | Repaired |
Annapolis, Maryland | General Electric | JRP14GOP3BG | F -1 | The Oven started beeping. The F1 failure code was flashing on the face.
I had an appliance company come out to look at it. They could not repair it.
My question : what if i have it repaired, you send it back and it doesn't work when I have it reinstalled ? If it's beyond hope, does the warrenty cover my cost of your repairing ? | Repaired |
Elm Grove, Louisiana | Kenmore | 911.4652092 | F1 | F1 fault unless oven temp is set | Awaiting receipt of timer |
tupelo, Mississippi | Sears | | N/A | temp. says 350 but don't get but 150 | Awaiting receipt of timer |
stockbridge, Georgia | General Electric | JRP14GOP4BG | N/A | punch in 200degrees--element barely gets worm. punch in 550 degrees elements begin to heat up 4 to 5 seconds oven beeps as thou it has reached 550 degrees. installed new WB21X5301 sensor asm. did not solve problem.
would like for you to test control and see if it is ok. | Repaired |
Cincinnati, Ohio | General Electric | jrp14g0p4bg | f1 | does not work | Awaiting receipt of timer |
Statesville, North Carolina | General Electric | JDP39 | F-1 | When turning oven off, error code F-1 flashes in addition to beeping. | Awaiting receipt of timer |
Richmond Hts, Ohio | Kenmore | 911-4832993 | N/A | Won't stop beeping | Repaired |
Lakeview, Ohio | Sears | 911.4042993 | temp to low | temp in oven not accurate. | Awaiting receipt of timer |
Spring Valley, California | General Electric | 911.4674990 | F1 | F1 error code | Awaiting receipt of timer |
Park City, Kentucky | General Electric | jmp31wor2wh | f1 | starts up when gets warm f-1 code starts | Awaiting receipt of timer |
Rock Hill, South Carolina | General Electric | | N/A | When you set the desired temperature the oven heats up and beeps when the temperature supposely reached. But oven the takes to long to cook something. | Repaired |
Crystal Falls, Michigan | Kenmore | 47429 | U/K | this is my mother in laws stove she says " clock kept time OK, I would put it to bake and it would stay on for maybe a minute or so, everything lit up like it was working, go to 100 degrees and then it would go off", She had a, Sears repair guy look and his comment to me was "it would start and then shut off" and that we needed to find a new timer and to use the internet to find a replacement. | Repaired |
Yelm, Washington | Roper | Kenmore | f1 | Kenmore range model #911.4554190, error code F1 with persistent beeping (turned off breaker to stop it, attempted to turn back on next day, still beeps). I have partly taken apart range, but obviously not smart enough to figure out how to get this portion apart. Have called handy man for assistance, he stated that with replacement part, he could do it. | Awaiting receipt of timer |
Loranger, Louisiana | General Electric | JMP29G0T1BB | N/A | The stove was in a flood. | Awaiting receipt of timer |
Richmond, Virginia | General Electric | JRP14GOP4BG | N/A | The oven will not get hot enough | Repaired |
Quincy, Illinois | General Electric | JSP28GP4BG | wont keep temperatur | won't keep temperature, already replaced thermostat and oven coil. | Awaiting receipt of timer |
Richmond, Virginia | General Electric | JRP14GOP4BG | N/A | The oven will not get hot enough | Repaired |
Harpers Ferry, West Virginia | Kenmore | 911 4742994 | none | Oven temp is approximately 170 degrees off. Replaced temp sensor. Same symptom. Measured temp sensor with DVM, ohm reading within expected limits. | Repaired |
Collinsville, Virginia | Kenmore | 9114552092 | None | This is the range control board/timer for a Kenmore drop-in range/oven. The oven works but is not heating to the specified temperature (e.g. When the oven temperature is set at 425 deg F, the actual oven temperature is less than 200). Replacement of the oven temperature sensor did not fix the problem. | Repaired |
oklahoma city, Oklahoma | General Electric | j sp31g0p4wh | N/A | set 550f bake temperature oven only heat up to 200f | Awaiting receipt of timer |
TOMPKINSVILLE, Kentucky | General Electric | | F1/BLANK | PROBLEM BEGAN WITH F1 FAULT
NOW DISPLAY WON'T LIGHT AT ALL | Repaired |
Montgomery, Texas | General Electric | JSP31GOP4WH | F1 | Constant alarm | Awaiting receipt of timer |
Media, Pennsylvania | General Electric | JSP38GDS4BG | I think it was "7" | Loud beeping tone. Had to turn off circuit breaker to stop beeping. Surface burners would work while beeping. Didn't try to use oven. | Repaired |
Huber Heights, Ohio | General Electric | JRP14 | F1 | Getting F1 error on Control Panel display. Powering off/on the oven usually stops the error/beeping but only for a few minutes. Buttons, display, timer all work again normally for a few seconds or minutes but then F1 error starts flashing. | Repaired |
Woolrich, Pennsylvania | General Electric | 911.4672994 | N/A | The oven signals that the desired temp has been reached. The elements are red.
The elements soon no longer read and the temp is not reached | Awaiting receipt of timer |
riverdale, Georgia | Kenmore | 9114742994 | f1 | f1 code loud beeping will not reset | Repaired |
easton, Pennsylvania | Kenmore | 911 4742994 | N/A | when set bake temperature at 400, oven temperature only goes to 150 according to oven thermometer. broiler works fine. | Repaired |
Scotrun, Pennsylvania | General Electric | JSP40A0S2AG | N/A | Heating element lights, oven has not reached selected temperature when the element turns off then does not come back on. If I raise the desired temperature the heating element lights then again turns off without reaching the selected temperature. | Awaiting receipt of timer |
GLEN ALLEN, Virginia | General Electric | J SP28GOP4BG | N/A | This oven indicates that it's up to temperature, but has been underbaking for a couple months. I've replaced the baking element and the temperature sensor, but it's still running under temperature (verified with oven thermometer). | Repaired |
ELIZABETHTOWN, Kentucky | Kenmore | 911 4742996 | N/A | wall oven will not heat | Awaiting receipt of timer |
Taylorville, Illinois | Kenmore | 9114742994 | None. Oven doesn't r | Oven will not reach set Bake/Broil temperature (only up to 250 degrees). Serviceman replaced Temperature Sensor, Bake AND Broil heating elements-- said Control panel was faulty and not available. Clock, Timer, everything else on display works-- NO ERROR messages. | Awaiting receipt of timer |