ERC14500RP General Electric/Kenmore Range/Stove/Oven Timer Repair

Failure codes, problems, and resolutions for General Electric/Kenmore timer model # ERC14500RP

General Electric (GE) ERCs and General Electric (GE) stove clocks and timersKenmore ERCs and Kenmore stove clocks and timers Manufacturer :  General Electric/Kenmore
Part Number :  ERC14500RP
Appliance Type :  Range/Stove/Oven
Color : 
Description :  Electronic Range/Oven Timer

 
 
Do you have a failed General Electric/Kenmore ERC14500RP timer?
Click here:

We can repair or replace your faulty ERC14500RP timer.
Request Appliance Timer Service

Recent Service Requests for General Electric/Kenmore Part Number ERC14500RP

CityModel NumberFailure CodeProblem DescriptionResolution
Richardson, TexasJSP26G P2ADNoneOven heating element and broiler element stopped working. Replacement oven heating element does not work.Repaired
Brampton, OntarioJCSP31GP1WHno codePower surge in house, timer is not displayingBeyond Repair
Bolingbrook, IllinoisJKP13GOP2BGUnknowwhen turning the oven on it goes 5-10 seconds and then shuts its self off.Repaired
Aurora, Maineunknown unreadableF1This gas wall oven uses the above electronic control unit. It controls oven timing, clock, temperature settings, oven or broiler...multifunctional. It gives the F1 error code. The timer can be shut off then comes right back on in a10 or 15 seconds.Awaiting receipt of timer
Hauppauge, New YorkJkp27wop3wgF1After usong the oven f1 comes onRepaired
Jackson, Georgia27 inchF1when power is applied, get a F1 codeRepaired
Kagawong, Ontariojcsp31gp2whF1Oven will turn on and heat but the Fi error will appear and continuous beep occursRepaired
Huntsville, AlabamaJKP13GOP4BGnoneOven will not achieve full temperature. Oven shuts off too soon. Temperature probe has already been replaced.Repaired
Huntsville, AlabamaJKP13GOP4BGnoneOven will not achieve full temperature. Oven shuts off too soon. Temperature probe has already been replaced.Repaired
Cincinnati, OhioJKP26GOP4BGF1Last 5 Years Oven Displays F1 Code shortly after applying power. We have been switching the main off and on for 5 Years. We can get the oven to operate by quickly pushing random keys on the pad and it will eventually go to heat mode. I talked to one of your techs on the phone and did the test he recommended. I applied power and set the clock then disconnected the key pad ribbon. It held time for about 30 seconds and as soon as the minute digit changed, the F1 Code returned. The Tech said this indicates the ERC has failed.Beyond Repair
Brighton, MichiganJ SP26 GOP 4ADBad TransistorOven and Broiler will not turn on. I do not hear the timer relays turning on.Repaired
mayfield, Kentuckyjkp1360p1bge1no heatRepaired
San Rafael, CaliforniaJKP13GP1BGNoneOven does not reach set BAKE temperature. Display can be set, but regardless of the BAKE temperature setting - never reaches beyond warm. I had replaced the probe in the unit with a service technician. No change. He said: you need a new ERC. The panel displays and runs up thru the temperatures as if it is heating up to bake. It ticks up thru all the numbers, and beeps when it stops at the set temp. Display works fine and accepts input. Shows correct time. The Broiler works. No error codes ever. I have had power outages but the thing always came back on.Repaired
OLD LYME, ConnecticutJKP13GT1BBF1FLASHING F1Beyond Repair
glen ellyn, IllinoisJGSP31F-1f-1 code even after unpluggingRepaired
Point Reyes Station, CaliforniaJRP15WP1WGn/aNeutral problem caused surge. Oven (and many other appliances) stopped working.Awaiting receipt of timer
Bowie, Maryland9114832993F-1F-1Beyond Repair
Fayetteville, TennesseeJ KP27W0P3WGF-1GE electric double wall oven: Model no J KP27W0P3WG serial no: AL621076Q The oven is making a "dinging" noise every time the oven has power. There is an F1 fault code although a couple of times it has shown F2. We tried to figure this out on our own and even tried running the oven through a cleaning cycle. It dinged the whole time but the door locked, the oven heated, and it went through an entire cleaning cycle. Thats all the info we have been able to see.Repaired
Bowie, Maryland9114832993F-1F-1Beyond Repair
Jonesboro Ga., Georgiajkp27wop3wgF1F1 code comes up when power is applied to the oven.Beyond Repair