Cranbrook, British Columbia | General Electric | | N/A | no elements work | Replaced with reconditioned timer |
Victoria, British Columbia | Kenmore | C970-418031 | na | top element comes on full blast no matter what setting is chosen. eventually overheats (F9 or F10 error code - she wasn't sure). checked temp sensor and it spec'd out ok at 1090 mohm resistance at both the connector and the board.
Not sure it's the board, but sure seems to point to it... | Awaiting receipt of timer |
cranbrook, British Columbia | Kenmore | | N/A | no elements working | Replaced with reconditioned timer |
Carlsbad, California | Kenmore | | N/A | My timer died. I sent it in to another company in IL. and they were unable to repair it. I am not sure if I am going to be able to get it back to send to you, or that you would even want it considering they were not able to repair. | Replaced with reconditioned timer |
Victoria, British Columbia | Kenmore | | N/A | Broiler randomly comes on during baking. Then it beeps the overheat code. I spoke with one of your tech folks a while back who suggested it was the broiler relay, which I tapped and it worked for another few months, but it's crapped out now. If you have one in stock, I'd like it sent and I'll send this back so they cross paths in the mail. Presumably you charge me and then I get a credit with mine arrives? If you don't have one, you'll get this in a few days to repair. | Repaired |
Toronto, Ontario | Frigidaire | C970-418031 | N/A | No longer works | Repaired |
Anola, Manitoba | Kenmore | C970-418031 | N/A | No elements/heat. | Awaiting receipt of timer |
Toronto, Ontario | Kenmore | C970-418031 | none | Can only set clock and turn on off oven light. Oven functions do not work. | Beyond Repair |
Philippi, West Virginia | Frigidaire | | N/A | no response by time | Awaiting receipt of timer |
Queen Charlotte, British Columbia | Frigidaire | C970-418031 | N/A | Control panel burst into flames at the top of the wall oven. One wiring stud meted off. Lower right rear area melted and burnt. This is the area is below the ribbon cable port. Happened when oven turned on to preheat at 350. | Awaiting receipt of timer |
Toronto, Ontario | Kenmore | C970-418031 | N/A | Oven does not heat. Everything else works. | Repaired |
Doylestown, Pennsylvania | Kenmore | 790 | No display | We went out of town for a few days and when we came home the oven was making a clicking noise and the display was not lit. We suffered a power outage at some point while we were away. | Beyond Repair |
Sherwood Park, Alberta Canada, Alberta | Kenmore | C-970 418032 | N/A | Clock and oven light work. Heating does not. | Repaired |
Slidell, Louisiana | Kenmore | Elite | F10 | Oven is over heating and displaying F10 code. Oven works again once power is reset but overheats again. | Repaired |
Lloydminster, Alberta | Kenmore | C970-418032 | N/A | Oven will not regulate. It just heats to 550 degrees Farenheit and you cannot control it. | Repaired |
SPARKS, Nevada | Kenmore | 790.49072401 | none | Elements will not heat. | Repaired |
Lancaster, California | Kenmore | 790.49073400 | none | Cannot set Clock, Can set temperature, but does not heat up. | Beyond Repair |
Silverton, Oregon | Kenmore | 790 | N/A | Control board works as it should, but there is no Bake or Broil. Appliance repair tech tested and verified with Fridgidair tech support that the control board is bad. | Repaired |
Calgary, Alberta | Kenmore | Kenmore C970418031 | none | no elements will work.. I have full voltage to the appliance.. relays do not engage to element.. neither upper or lower.. the timer appears as though everything is working but no heat.. no codes.. but no voltage to either element when engaged.. will buy new, reconditioned or send mine in. Trent 403-803-5044 | Repaired |
Cardigan, Prince Edward Island | Kenmore | C970-418021 | N/A | Bake element not functioning, evidence of burn on Bake Relay. Both lead wires burnt on bake element and one connection on element burnt off. Broil element not functioning as well. | Repaired |