Nashville, Tennessee | Jenn-Air | SVD48600P | 71002959 | none - intermittent | timer/control comes on/off intermittently | Repaired |
Burlington, Connecticut | Jenn-Air | SVD48600P | 71002959 | N/A | Clock and all other buttons stopped working | Repaired |
Beasley/ Phone 250-551-2798, British Columbia | Jenn-Air | SVD48600PC | 71002959 | N/A | Does Not Stay On . Digital Screen. | Repaired |
Raleigh, North Carolina | Jenn-Air | SVD48600P | 71002959 | F-3 | F-3 error message repeatedly blinks and cuts off the oven. Ultimately, it will not turn off for oven use. | Repaired |
Raleigh, North Carolina | Jenn-Air | SVD48600P | 71002959 | F-3 | F-3 error message repeatedly blinks and cuts off the oven. Ultimately, it will not turn off for oven use. | Repaired |
Raleigh, North Carolina | Jenn-Air | SVD48600P | 71002959 | F-3 | F-3 error message repeatedly blinks and cuts off the oven. Ultimately, it will not turn off for oven use. | Repaired |
Lacey, Washington | Jenn-Air | SVD48600P | 71002959 | blank | no display, no operation | Awaiting receipt of timer |
Colebrook, New Hampshire | Jenn-Air | SVD48600P | 71002959 | N/A | On occasion the broil element will stay on and not shut down. Customer will shut breaker off and then element will not come back on until called for again. | Timer inspected, no repairs necessary |
St-Félix de Valois, Québec | Jenn-Air | SVD48600PC | 71002959 | N/A | DEAD/ DO NOT WORK | Awaiting receipt of timer |
glastonbury, Connecticut | Jenn-Air | SVD48600P | 71002959 | N/A | OVEN WON'T HEAT. FAN NOT WORKING | Repaired |
Hatfield, Massachusetts | Jenn-Air | SVD48600P | 71002959 | N/A | Neither bake nor broil selections function (no response). Clock and timer still work. | Repaired |
Hatfield, Massachusetts | Jenn-Air | SVD48600P | 71002959 | N/A | Neither bake nor broil selections function (no response). Clock and timer still work. | Repaired |
Hobart, Wisconsin | Jenn-Air | SVD48600P | 71002959 | N/A | Does not heat on bake cycle, broil cycle works. | Awaiting receipt of timer |
SANTA CRUZ, New Mexico | Jenn-Air | SVD48600P | 71002959 | none | NO CONTROLS, NO CLOCK, NO OVEN, BUT CONVECTION FAN ON ALL THE TIME. | Repaired |
Kapaa, Hawaii | Jenn-Air | SVD48600P | 71002959 | N/A | Oven/broil does'nt work | Awaiting receipt of timer |
Abbotsford, British Columbia | Jenn-Air | SVD48600PC | 71002959 | N/A | The "up arrow" on the controls does not work, only the "down arrow". I am unable to use time, increase oven temperature above 350 (the oven temp starts at 350 and then is adjusted by arrow buttons). | Awaiting receipt of timer |
JAMAICA PLAIN, Massachusetts | Jenn-Air | SVD48600P | 71002959 | N/A | NO BAKE | Repaired |
Green Bay, Wisconsin | Jenn-Air | SVD48600P | 71002959 | N/A | Oven does not heat to proper temperature | Awaiting receipt of timer |
Rochester Hills, Michigan | Jenn-Air | SVD48600P | 71002959 | N/A | Oven (bottom) heating element has no signal (element tested and works) | Repaired |
Tyrone, Pennsylvania | Jenn-Air | SVD48600P | 71002959 | no code--oven will n | Clock and timer working. Oven will not heat to temp. Local repair man says it is this part malfunctioning | Repaired |
Seattle, Washington | Jenn-Air | SVD48600P | 71002959 | None | All aspects of the control panel work fine except the elements in the oven do not turn on. The repair man said to problem is in the control panel as there is a something in the panel that has to work for the baking and broiling elements to turn on. He did remove and check the internal fuse and it works fine. | Repaired |
Prescott, Arizona | Jenn-Air | SVD48600P | 71002959 | N/A | Relays clicking, no bake, no broil | Repaired |
Newburyport, Massachusetts | Jenn-Air | SVD48600P | 71002959 | ? | None of the oven functions work | Repaired |
Olds, Alberta | Jenn-Air | SVD48600PC | 71002959 | N/A | Clock flashes continually. Oven will start to warm up but then shuts down. Time cook light also shuts down. | Repaired |
SAULT STE. MARIE, Ontario | Jenn-Air | SVD48600PC | 71002959 | N/A | RANGE NOT TURNING ON | Repaired |
Chester, Vermont | Jenn-Air | SVD48600P | 71002959 | N/A | The regular Bake and Convection Bake functions do not get to temperature selected. For example, if you set the oven to 350 degrees, it takes an extraordinary amount of time to get to 260 degrees, and then it will go no higher. The element was tested and is OK and power voltage tested OK to the element. The Broiler functions properly. | Repaired |
Louisville, Kentucky | Jenn-Air | SVD48600P | 71002959 | Blank | It does not turn on at all. The face is blank | Awaiting receipt of timer |
Louisville, Kentucky | Jenn-Air | SVD48600P | 71002959 | Blank | It does not turn on at all. The face is blank | Awaiting receipt of timer |
Nanaimo, British Columbia | Jenn-Air | SVD48600PC | 71002959 | N/A | Oven will not heat in any mode. | Awaiting receipt of timer |
Kingwood, Texas | Jenn-Air | SVD48600P | 7100-2959 | N/A | My oven touchpad went out and cannot be replaced. I am looking for a replacement. | Awaiting receipt of timer |
Guelph, Ontario | Jenn-Air | SVD48600PC | 71002959 | none | Oven does not heat. Everything else is good, except no output from electronic control. | Repaired |
tipton, Iowa | Jenn-Air | SVD48600P | ?? | no error code displa | Both the Oven Burner and Broiler Burner failed to work at the same time. As it was working on it i managed to break one of the contact assemblies off the circuit board! (sorry) This was a factory new replacement timer purchased 2 years ago. | Repaired |
tipton, Iowa | Jenn-Air | SVD48600P | ?? | F3 Error | This time has two problems. Primary problem is F3 error. ( I have already replaced the oven temperature sensor.) Second issue is that on the back side of the faceplate, behind the Timer UP or Increase arrow, the little plastic pin is broken off and missing. For now, this isn't a problem as i can share the faceplate with both timers. This is the original timer, oven is roughly 15 years old. | Repaired |
tipton, Iowa | Jenn-Air | SVD48600P | ?? | no error code displa | Both the Oven Burner and Broiler Burner failed to work at the same time. As it was working on it i managed to break one of the contact assemblies off the circuit board! (sorry) This was a factory new replacement timer purchased 2 years ago. | Repaired |
tipton, Iowa | Jenn-Air | SVD48600P | ?? | F3 Error | This time has two problems. Primary problem is F3 error. ( I have already replaced the oven temperature sensor.) Second issue is that on the back side of the faceplate, behind the Timer UP or Increase arrow, the little plastic pin is broken off and missing. For now, this isn't a problem as i can share the faceplate with both timers. This is the original timer, oven is roughly 15 years old. | Repaired |
WORCESTER, Massachusetts | Jenn-Air | SVD48600P | 5700M662-60 | N/A | | Repaired |
Bethesda, Maryland | Jenn-Air | SVD48600P | 5700M662-60 | n/a | 10 days ago, clock display went out and loud buzzing noise came from unit. Flipped breaker and left off for 5 minutes. Turned back on, reset, everything normal. Yesterday, same symptom, but cure doesn't work. Online forums suggest that it is the clock/board, but it is available only as special order (also part no. 71002959). | Awaiting receipt of timer |
Johnston, Rhode Island | Jenn-Air | SVD48600P | 5700M662-60 | N/A | timer and oven shuts off . nothing shows at all. comes back on but cannot bake above 350 degrees and may shut off. up and down arrows only effect a lowering of temperature. | Awaiting receipt of timer |
Jefferson, Maine | Jenn-Air | SVD48600P | 5700M66260 | Just went dead | Was baking potatoes and it just shut everything down mid way through the bake? | Awaiting receipt of timer |
VANCOUVER, British Columbia | Jenn-Air | SVD48600PC | 5700M662-60 | F3 F5 | Oven stays on for only twenty minutes and then shuts off
error code comes on F3 or F5
can't bake a cake or anything that takes an hour to bake as
the oven shuts off after only twenty minutes | Repaired |
Jefferson, Maine | Jenn-Air | SVD48600P | 5700M66260 | Just went dead | Was baking potatoes and it just shut everything down mid way through the bake? | Awaiting receipt of timer |
Pho. Az, Arizona | Jenn-Air | SVD48600P | 5700M662-60 | Control board fail | The fan of the oven starts out fast and slows down and eventually stops.A technician told us that the control board is causing the problem.It makes the ovens fan start and then stops because the 110 volts arent entering repeatedly.This control board needs to be refurbished. | Awaiting receipt of timer |
Eau Claire, Wisconsin | Jenn-Air | SVD48600P | 5700M662-60 | none | The timer appears to work fine (has no error codes) but intermittently cannot preheat the oven within the normal timeframe. It can reach 280 degrees but then is extremely slow to increase the temperature by even 5 degrees after that. One time it quickly jumped up to 350 degrees after sitting at 280 degrees for a long time. After the breaker was turned off and back on, it worked one time (pre-heated to 350 degrees in less than 10 minutes), but then stopped working correctly again after that. Now, even turning the breaker off and on does not seem to fix it. | Repaired |
Kenmore, Washington | Jenn-Air | SVD48600P | 5700M662-60 | Up button does not w | The up button the the control panel doesn't work. This controls the temperature and timer for the stove. | Awaiting receipt of timer |
Louisville, Kentucky | Jenn-Air | SVD48600P | 5700M662-60 | F-2 and F-3 | Received an F-2 error code after cooking one night. Now when we try to use the bake or broil options, receive error code F-3. | Repaired |
Los Angeles, California | Maytag | SVD48600P | 5700m662-60 | no lights on panel | Beeping noise than info panel went out.. no oven, no pilot
Repair guy says needs new.timer but has none | Awaiting receipt of timer |
Pine Grove, Pennsylvania | Jenn-Air | SVD48600P | 5700M662-60 | F4 | Oven spikes to high temperature and gives the error coder F4 | Timer inspected, no repairs necessary |
Dollard-des-Ormeaux, Québec | Jenn-Air | SVD48600P | 5700M662-60 | Timer doesn't power | Baked element died along with it the timer stopped working. I replaced the bake timer but oven controls aren't working. | Beyond Repair |
Baltimore, Maryland | Jenn-Air | SVD48600P | 5700M662-60 | NA | oven only reports a 100degree temperatvre and fails to warm up. Service identified controller as the problem, but noted that they are out of stock. Found this site to repair. Thanks! | Repaired |
Baytown, Texas | Jenn-Air | SVD48600P | 5700M662-60 | N/A | Broiler element turned on by itself and would not cancel.(gibberish on panel) I flipped breaker off, waited about two hours turned back on there was nothing showing on timer and it is inop. | Beyond Repair |
Scarborough, Ontario | Jenn-Air | SVD48600PC | 5700M662-60 | N/A | Display goes off intermittently whether oven is on or not. Will sometimes come back on if you tap the face of the timer. Also, the broiler and the fan will turn on (sometimes) of its' own accord when the oven is on. At one time we had an F2 error code but it doesn't do that anymore. | Beyond Repair |
Los Angeles, California | Maytag | SVD48600P | 5700m662-60 | no lights on panel | Beeping noise than info panel went out.. no oven, no pilot
Repair guy says needs new.timer but has none | Awaiting receipt of timer |
Melrose Ma., Massachusetts | Jenn-Air | SVD48600P | 5700M662-60 | Not Shown | Self Cleaning has not worked for along time
Current problem oven and broiler not heating at all
Service Tech from Gray's Appliance Melrose Ma. told me the problem
was the timer. | Repaired |
Burlington, Ontario | Jenn-Air | SVD48600PC | 5700M662-60 | N/A | Oven does not reach/hold requested temperature | Repaired |
Smithfield, Utah | Jenn-Air | SVD48600P | 5700M662-60 | NA | Doesn't light up and no response from buttons. | Awaiting receipt of timer |
Alsea, Oregon | Jenn-Air | Jenn-Air SVD48600P | 5700M662-60 | N/A | Touch pad does not respond. Cannot turn oven on. | Awaiting receipt of timer |
Salt Lake City, Utah | Jenn-Air | SVD48600P | 5700M662-60 | F3 | Oven begins preheating, but eventually gives an F3 error and shuts off. (Last time this happened was at 375 degrees.) We have replaced the thermo sensor and get same error. Sometimes the F3 alternates with an F5 error.
I would be open to replacing the control panel if you have one available. Thanks, Ryan | Awaiting receipt of timer |
Hot Springs, Arkansas | Jenn-Air | SVD48600P | 5700M662-60 | N/A | Oven intermittently doesn't go on | Repaired |
Burlington, Vermont | Jenn-Air | SVD48600P | 5700M662-60 | F2 | The f2 code went off and the upper heating element remained on. The oven heating element would not turn off even though the timer indicated that the move was not on. I turned off the circuit breaker to the range and left it off or a bit. When i turn the breaker on the oven resumed heating even though the timer indicated it was off. | Repaired |
Brownstown, Michigan | Jenn-Air | SVD48600P | 5700M662-60 | None | Alarm Sounds when not using Drops out of bake cycle Using igniter changes clock | Awaiting receipt of timer |
Cassel, California | Jenn-Air | Jenn Air SVD48600P | 5700M662-60 | N/A | Touchscreen is dark. Oven will not turn on and a humming sound is present.
Stovetop burners work OK. | Repaired |
Pickerington, Ohio | Jenn-Air | SVD48600P | 5700m662-60 | F3 | After oven is at entered temperature for a while, error code F3 displays and oven shuts off. Convection fan in oven runs intermittently when not on convection and sometimes when oven is off. | Awaiting receipt of timer |
Whitefield, New Hampshire | Jenn-Air | SVD48600P | 5700M662-60 | no bake or broil | no bake or broil , checked for power out at board , no power out | Repaired |
Chicago, Illinois | Jenn-Air | SVD48600P | 5700M662-60 | N/A | Blinks on and off | Repaired |
Edina, Minnesota | Jenn-Air | SVD48600PU | 5700m662-60 | none - no display | the display doesn't work, so I can't operate the oven, clock, timer, etc. | Beyond Repair |
Atlanta, Georgia | Jenn-Air | SVD48600P | 5700M662-60 | N/A | The Bake or clock does not work any longer. The up button on the temp does not work. It started blinking out prior to those problems. | Repaired |
Kanata, Ontario | Jenn-Air | SVD48600PC | 5700M662-60 | none | Repairman indicated there was a problem with the bake function. There was no code indicating a problem but the oven would not go beyond 280 degrees regardless of oven setting.
Broiler seemed to function properly. | Repaired |
Chicago, Illinois | Jenn-Air | SVD48600P | 5700M662-60 | N/A | Blinks on and off | Repaired |
quincy, Massachusetts | Jenn-Air | SVD48600P | 5700M66-260 | N/A | could you fix the one I have if you do not have one? | Awaiting receipt of timer |
Anglemont, British Columbia | Jenn-Air | SVD48600PC | 5700M662-60 | N/A | When bake button is pushed if you push the up arrow 350 appears,but as you push the up button the temperature selected goes down just as if you were pushing the down arrow.If you select broil the up arrow increases the temperature as it should. Everything else functions normally. | Repaired |
Katy, Texas | Jenn-Air | SVD48600P | 5700M662-60 | N/A | NO DISPLAY NO BEEP NOISE NO START THE OVEN | Awaiting receipt of timer |
St.paul, Minnesota | Jenn-Air | Jenn Air SVD48600P | OEM 71002957 | Dead no display | No display on both units | Awaiting receipt of timer |
St.paul, Minnesota | Jenn-Air | JennAir SVD48600P | OEM 71002957 | No display | Blank display | Awaiting receipt of timer |
St.paul, Minnesota | Jenn-Air | Jenn Air SVD48600P | OEM 71002957 | Dead no display | No display on both units | Awaiting receipt of timer |
St.paul, Minnesota | Jenn-Air | JennAir SVD48600P | OEM 71002957 | No display | Blank display | Awaiting receipt of timer |
Worthington, Ohio | Jenn-Air | SVD48600P | 71002957 | None | The electronic screen displays all eights. | Repaired |
Huntsville, Alabama | Jenn-Air | Jenn Air SVD48600P | 71002957 | N/A | The oven shuts down when it gets up to temp for a while. Seems to be a common problem on these ranges. | Repaired |
Maineville, Ohio | Jenn-Air | SVD48600P | AP4396710 | F5 | Intermittent F5 when using oven controls, clock works normally. | Repaired |
Suwanee, Georgia | Jenn-Air | Jenair SVD48600P | 7100 2959 old 5700 M662-60 new | N/A | Dual fuel Range,Burners work with Gas, Oven will not operate,Downdraft works | Repaired |
Suwanee, Georgia | Jenn-Air | Jenair SVD48600P | 7100 2959 old 5700 M662-60 new | N/A | Dual fuel Range,Burners work with Gas, Oven will not operate,Downdraft works | Repaired |
Broken Arrow, Oklahoma | Jenn-Air | SVD48600P | 7100243 | NONE | CONTROL IS DEAD AS NO POWER GOING TO IT | Awaiting receipt of timer |
Birmingham, Alabama | Jenn-Air | Model SVD48600P | 5700m662-60 per your website | N/A | The bottom heating element burned out. The electricity to the oven was turned off to replace the element. When the power was restored the panel would not come on. | Beyond Repair |
Salt Lake City, Utah | Jenn-Air | SVD48600P | 7601P510-60 | None Indicated | Bake and broil elements do not heat up. Everything on Control Panel appears to work. No fault codes are indicated. Can turn bake/broil on and you hear clicking and a preheat temp of 100 degrees is indicated. The elements never heat up though and the temperature stays at an indicated 100 degrees. Have verified that proper voltage is flowing from outlet, elements tested for continuity along with temperature sensor and high limit thermostat. All tested as working correctly. Therefore it would seem the timer/control panel has some sort of failure and is not completing the circuit to allow electricity to flow to the elements | Repaired |
Mead, Washington | Jenn-Air | SVD48600P | 7601P510-60 | F5 | Oven will not heat up sits at 100 degrees. ( Elements ok, relay board replaced, high temp fuse replace.) | Repaired |
Amherst, New York | Jenn-Air | SVD48600P | 5700M662-60 (Formerly 71002959 0909 NM) | F2 and F3, think an | All works well except the OVEN. Heats up and then beeps and codes out. Usually F3 I believe but have had F2 and an F5. I replaced the oven sensor twice now..thought that worked for a while but the problem returned. | Awaiting receipt of timer |
Vancouver, British Columbia | Jenn-Air | SVD48600PC | ??PS2078136 | none; panel loses po | Control panel frequently and randomly loses power when oven is on at, what seems to be, above 300*. Pressing the oven bake or convention button sometimes will return power, oven will run and then again control panel will shut down.
The high heat oven sensor was replaced and initially seem to fix the problem, for a short time. Oven is now back to is shutting down. In a phone call with a repair technician, the control panel was identified as the most probable issue. | Repaired |
Rosendale, New York | Jenn-Air | SVD48600P | 6 | ? | Oven not working; Convection fan runs constantly. Currently breaker to over on electric panel turned off. | Beyond Repair |
Hamilton, Ontario | Jenn-Air | SVD48600PC | 02400173 | N/A | No power and buzzing relay. | Repaired |
Whitby, Ontario | Jenn-Air | SVD48600PC | PS2078134 | F5 | We get a F5 code when we are using the oven on "convection roast" | Repaired |
Savannah, Georgia | Jenn-Air | SVD48600P | 5700M622-60 | N/A | Have had technician check it out. Oven doesnt work. | Awaiting receipt of timer |
Toronto, Ontario | Jenn-Air | SVD48600PC | 7601P518-68 100-775-00 585/905'F | NA | It just died -- When pressing CANCEL the entire panel lights with all digets | Beyond Repair |
red lion, Pennsylvania | Jenn-Air | SVD48600P | 5700M662-60 | none | up arrow on face does not work | Awaiting receipt of timer |
Grove City, Pennsylvania | Jenn-Air | SVD48600P | 5700M662-60 | SHUTS OFF | i HAVE REPLACED THE Temp probe. The clock will shut off typically above 350 degrees. It does come back on. | Repaired |
Cohasset, Massachusetts | Jenn-Air | SVD48600P | 5700M662-60 | N/A | Originally Up arrow did not work. But when loosening a screw to take it off the board shorted before I turned off the power, | Repaired |
San Antonio, Texas | Jenn-Air | SVD48600P | PS2078136 | N/A | Timer does not function.
The BAKE temperature cannot be set above 350 degrees. | Repaired |
Dublin, Ohio | Jenn-Air | SVD48600P | 71002959 | F-3 | Oven turns on will stay on for a while and then F3 error comes on (beeping and blinking) and turns oven off. | Awaiting receipt of timer |
Richmond Hill, Ontario | Jenn-Air | SVD48600PC | 5700M662-60 | none - oven just tur | When we use the oven, the display starts to blink and the oven turns off. Sometimes the display goes off entirely. Eventually the display returns and the oven functions once again. | Repaired |
Sneads Ferry, North Carolina | Jenn-Air | SVD48600P | 5700M662-60 | n/a | Oven, broiler, oven cleaning and convection will not get hot-inop. | Repaired |
TORONTO, Ontario | Jenn-Air | SVD48600PC | 024-00173 | NONE | NEITHER BROIL NOR BAKE WORK AT ALL
OVEN FAN WORKS WHEN ON BROIL
DOOR LOCK MECHANISM WORKS | Repaired |
Toronto, Ontario | Jenn-Air | SVD48600PC | Whirlpool 5700m662-60 | F5 | Issue 1. Oven was generating an F3 error. I replaced the temperature sensor. It is still not working properly, though now it is generating mostly F5 errors, usually after being turned on for a few minutes.
Issue 2. Also, the plastic pins operating the Up and Down arrows are broken. I fixed the Up control with a piece of dowel and some crazy glue, and it works fine! However for the Down arrow I think I got glue in the switch and it will no longer work. I don't think this can be fixed, but please take a look. | Repaired |
Lavaltrie, Quebec | Jenn-Air | SVD48600PC | 71002959 | N/A | LED DISPLAY DONT LIGHT
CAN NOT SET OVEN TEMPERATURE | Awaiting receipt of timer |
Bedford, New Hampshire | Jenn-Air | SVD48600P | 5700m662-60 | no failure codes | "Cooling fan" runs when oven goes above 250 degs (didn't used to do this---functionally everything works but my wife says she cannot live with the noise!
Started happening after one day when controller made some funny relay or sparking noise when a stove top burner was turned on. | Awaiting receipt of timer |
Hammonds Plains, Nova Scotia | Jenn-Air | SVD48600PC | 7601P510-60 | F3 and F5 | The timer keeps coming up F3 and F5 codes and self clean does not work | Repaired |
Ajax, Ontario | Jenn-Air | SVD48600PC | 5700m662-60 | F2 | Won't heat up | Awaiting receipt of timer |
Ajax, Ontario | Jenn-Air | SVD48600PC | 5700m662-60 | F2 | Won't heat up | Awaiting receipt of timer |
Mississauga, Ontario | Jenn-Air | SVD48600PC | 209699 | F2 or 3 not doing it | Was showing error codes at heats higher than 350F. Now oven doesn't heat properly and neither self -clean or the broiler work | Repaired |
Schwenksville, Pennsylvania | Jenn-Air | SVD48600P | Old # 71002959 New# 5700M662.60 | none | Range is propane gas burners but over is electric so duel fuel. The display used to work but the oven would shut off after being on for about 30-45 mins and then would come back on blinking the display. Now the display will not come on at all. | Repaired |
Portland, Oregon | Jenn-Air | SVD48600P | 5700m662-60 | N/A | The timer buttons do not always function, meaning the timer and oven temperature cannot be set. The problem is worsening, to the point that the buttons almost do not work at all. | Awaiting receipt of timer |
Lake Oswego, Oregon | Jenn-Air | SVD48600P | 7601P510-60 | None, temp buttons n | TEMP UP AND DOWN BUTTONS NOT WORKING, ALL ELSE IS FUNCTIONAL | Repaired |
Ottawa, Ontario | Jenn-Air | SVD48600PC | PS2078136 | F5, F3, F2 | Oven seems to work fine, but the control panel gives an F5 or F2 error once it heats up. I have already replace the long oven temperature sensor. | Repaired |
Lake Oswego, Oregon | Jenn-Air | SVD48600P | 5700m6662-60 | None, temp buttons n | TEMP UP AND DOWN BUTTONS NOT WORKING, ALL ELSE IS FUNCTIONAL | Repaired |
Belmont, Massachusetts | Jenn-Air | SVD48600P | 71002959 | N/A | The Arrow Up button doesn't work. As a result we cannot increase the temp to more than the default of 350F | Repaired |
Walpole, New Hampshire | Jenn-Air | SVD48600P | Unknown | N/A | Oven no work, Broiler no work, Convection Fan never worked since I bought the house. Oven and broiler went out on the same day. Appliance technician checked to make sure power was getting to the board | Repaired |
Louisville, Kentucky | Jenn-Air | SVD48600P | 71002959 | Does not turn on. | Does not power on. | Beyond Repair |
Highland, Michigan | Jenn-Air | SVD48600P | 71002959 | N/A | Oven setting clears and stops for a few minutes then the blank display returns to normal. the oven heating stops. | Awaiting receipt of timer |
Portland, Oregon | Jenn-Air | SVD48600P | 5700M662-60 | none | LCD is difficult to read, all digits are "ON" making it difficult to read the time, temperature, etc. Happened after a power outage. | Awaiting receipt of timer |
Bainbridge Island, Washington | Jenn-Air | SVD48600P | 71002959 | N/A | The oven will seem to work fine, start (allow selection of convection methods), even cook for a period of time then will no longer maintain temp, clock time will flash as if power was lost then restored or oven will shut down (indicating no power at all). Might be temp related as system will restore after a short wait, but likely repeat (intermittent) or not. I would like to repair or replace part thanks. | Awaiting receipt of timer |
Saskatoon, Saskatchewan | Jenn-Air | SVD48600P | 71002959 | N/A | Panel shut down while oven works suddenly and works again after | Repaired |
patterson, New York | Jenn-Air | SVD48600P | 71002959 | N/A | not able to adjust oven temperature with ''UP'' arrow on control panel | Awaiting receipt of timer |
Mississauga, Ontario | Jenn-Air | SVD48600PC | 5700m662-60 | N/A | There is an up and down arrows which adjusts both timer and oven temp. Up arrow has bit the dust- gets used the most. Problem is not interrmittant | Repaired |
Burlington, Ontario | Jenn-Air | SVD48600PC | 71002957 | N/A | Oven Failed | Timer inspected, no repairs necessary |
TIny, Ontario | Jenn-Air | SVD48600PC | 7601P510-60 | Unknown | Timer function however oven will not heat up on anything except one heating function, Bake only, functions not working are convections, both settings heats to like 159 and stops. Bake function seems to work will come to temperature slowly. I had a service technician look at the oven and said the timer was broken and he could not get parts. All other functions of the oven and timer were checked and functioning. | Repaired |
Greenfield, Indiana | Jenn-Air | SVD48600P | 7601P510-60 | There was no failure | No longer will show anything in viewer window. Having another part of the stove repaired (lower relay). If this cannot be fixed I would like to buy a reconditioned timer or a new timer whichever you may have. | Repaired |
Saskatoon, Saskatchewan | Jenn-Air | SVD48600PC | 71002959 | N/A - tech advises B | Both bake and broil heat / temperature commands appear in screen, but are not received by oven elements, as no heat in oven from either command. | Repaired |
DRUMMONDVILLE, Quebec | Whirlpool | SVD48600PC | 71002959 | N/A | The oven element is not working but I checked the element itself and it's good. Therefore, I assume it's the control board. | Beyond Repair |
The Colony, Texas | Jenn-Air | SVD48600P | 5700M662-60 | No code, there is no | No display on time, all buttons unresponsive. | Beyond Repair |
Morro Bay, California | Jenn-Air | SVD48600P | 12001690A | Donââ¬â¢t know | The push pad for up and down is worn out. | Repaired |
Caledon East, Ontario | Jenn-Air | SVD48600PC | 71002959 | Up arrow button does | The up arrow for oven temperature doesn’t work. Max temperature 350 which is default when turned on. | Awaiting receipt of timer |
DRUMMONDVILLE, Quebec | Whirlpool | Jenn-Air Range SVD48600PC | 71002959 | N/A | Everything works fine except the oven element. The element itself has been checked out and it's good. The broil element works fine as well. I therefore assume it's the timer | Repaired |
Grafton, Illinois | Jenn-Air | SVD48600P | 71002959 | N/A | no display | Awaiting receipt of timer |
Harrisburg, Pennsylvania | Jenn-Air | SVD48600P | 5700M66260 | F7 | display went blank for a few minutes. Now displays F7 code. | Awaiting receipt of timer |
Caledon East, Ontario | Jenn-Air | SVD48600PC | 71002957 | N/A | The up arrow on oven temperature doesn't work. Stuck at 350 which is default temperature when turned on. | Awaiting receipt of timer |
Hertford, North Carolina | Jenn-Air | SVD48600P | Control panel | N/A | Broiler element will not turn off | Awaiting receipt of timer |
Toronto, Ontario | Jenn-Air | SVD48600PC | 024-00173-04 | N/A | Repair person reported electronic short that then disrupted oven relay. | Repaired |
LOVELAND, Ohio | Jenn-Air | SVD48600P | 71002959 | DIDN'T SEE ONE | BROKEN MALE CONNECT ON CONTROL PANEL I BROKE REMOVING AND OVEN WON'T WORK BUT HEATING ELEMENT IS GOOD . PLUS UP ARROW BUTTON WILL NOT WORK AT ALL ADJUSTING CLOCK OR ANYTHING. WHEN TURN OVEN ON ARROW TO ADJUST UP DIDN'T WORK AND DON'T THINK IT WAS EVEN GETTING WARM. | Repaired |
Olds, Alberta | Jenn-Air | SVD48600PC | 71002959 | N/A | Actual oven temperature is much below the timer settings and readings. At 350 degree setting,oven is about 280. At 425 it is about 360 degrees. Sometimes the temperature drops sharply.
This unit was repaired by you in 2015 and is under warranty. | Timer inspected, no repairs necessary |
charlotte, North Carolina | Jenn-Air | SVD48600P, 18459574AW | 71002959 | doesn't heat up abov | HI: I CANNOT find this part anywhere online and have no clue how to un-install it to repair. can anyone help? | Repaired |
Olds, Alberta | Jenn-Air | SVD48600PC | 71002959 | N/A | This unit was sent in May 2018 because of intermittent baking temperature problems, mainly below temperature. Resulted in items being under-baked but top being burnt. You found no problems and returned it.
The problems remain even when oven sensor was replaced.
Talked with Howard Simons on June 7. He said that you folks would replace the bake relay. He thought that, because the problem is intermittent, a problem with that relay may have not shown up last time. We would like to have the roast relay replaced at the same time.The unit is under warranty | Repaired |
Charlotte, North Carolina | Jenn-Air | SVD48600P, 18459574AWY | ? | ? | My oven will only heat to 100. Our repair man told me it was one of two problems and obviously the other was not the case. He said it is the face piece. Thank you. | Repaired |
Moultonborough, New Hampshire | Jenn-Air | SVD48600P | 71002959 | timer won't set | Timer will not set | Repaired |
Bow, Washington | Jenn-Air | SVD48600P | PS2078136 | F3 | Oven only goes to 350 at bake. Broil works, but it can only be turned lower in temperature. Only the down button works for temp or clock setting. | Beyond Repair |
Raleigh, North Carolina | Jenn-Air | SVD48600P | 209699 | N/A | The range has a loud electric hum when the power is on. Also the timer display is blank. | Repaired |
Davidson, North Carolina | Jenn-Air | SVD48600P | 5700M662-60 | N/A | Up arrow button to increase oven temperature does not work. | Awaiting receipt of timer |
South Barre, Vermont | Jenn-Air | SVD48600P | 71002959 | none - intermittent | Random intermittent disruption of clock and oven functions. Light tapping of housing sometimes returns function. Sometimes functions completely normally, sometimes the readout is blank. | Repaired |
Trochu, Alberta | Jenn-Air | SVD48600PC | 5700M662-60 | F3 | Oven heats up to temperature, then in about 10 minutes it gives the F3 Error. The very first time was a F5 Error code, then consistently was F3 after many attempts. Did the usuals, turned off the breaker, restarted, still code F3. Note: we put a brand new sensor in and still get the F3 Error code. | Repaired |
Esko, Minnesota | Jenn-Air | SVD48600P | 71002959 | F3 | F3 Error code after using oven for about 25-35 minutes. Tried replacing the oven temperature sensor which didn’t fix the problem. | Repaired |
Esko, Minnesota | Jenn-Air | SVD48600P | 71002959 | F3 | F3 Error code after using oven for about 25-35 minutes. Tried replacing the oven temperature sensor which didn’t fix the problem. | Repaired |
Esko, Minnesota | Jenn-Air | SVD48600P | 71002959 | F3 | F3 code while oven is heating up to temperature. I’ve replaced the oven temperature sensor as well but it didn’t fix the problem. | Repaired |
Belfair, Washington | Jenn-Air | SVD48600P | indicated by label on unit | N/A | blank screen | Awaiting receipt of timer |
Belfair, Washington | Jenn-Air | SVD48600P | AP4396710- (5700M662-60) | N/A | blank screen | Awaiting receipt of timer |
Truro, Nova Scotia | Jenn-Air | SVD48600PC | 76015P10-60 | No codes. Panel not | Oven was on and working. Heard a click just like when you shut off the oven. No lights on panel at all and oven not working. When you hit bake or cancel, the panel flashes for a second ... but oven does not respond at all. | Beyond Repair |
Fayetteville, Georgia | Jenn-Air | SVD48600P | 5700M662-60 | F3 | Front panel cover has hole and up button might need repair. F3 code following temperature climbing randomly. | Beyond Repair |
New York, New York | Jenn-Air | SVD48600P | AP4396710 | dead | Timer appears to be dead following a power outage. Oven has power, but controller LED does not light and buttons are unresponsive. | Awaiting receipt of timer |
Courtice, Ontario | Jenn-Air | SVD48600PC | 71002959 | no error code just s | The control cuts out and goes black when in bake mode when the temperature is increasing beyond 225 dF. We push off button several times then the screen lights up push bake and continues increasing the temperature unit it cuts out again and repeats. Have tried using the range vent fan hoping to cool the electronic board but does not always have an effect. | Repaired |
Fayetteville, Georgia | Jenn-Air | SVD48600P | 71002959 | F3 | Would like a reconditioned timer. Timer is not repairable | Awaiting receipt of timer |
MIDLOTHIAN, Texas | Maytag | SVD48600P | 5700m662-60 | Lack | Cant adjust heat higher than 350. Goes down but not up. Up button doesnt appear to work | Awaiting receipt of timer |
Mississauga, Ontario | Jenn-Air | SVD48600PC | Label on Timer sent in | F5 and F3 | Oven works for a period of time, then you usually get a F5 reading and from time to time a F3 reading - at time when oven is not on the convection fam will go on for a breif few seconds. | Repaired |
Greenfield, Indiana | Jenn-Air | SVD48600P | Not sure May be 71002959 | no failure code | The touch pad for the clock does not work - afraid there may be other failures soon. | Repaired |
Toronto, Ontario | Maytag | JennAir SVD48600PC | 71002959 | N/A | Looking to replace the control board of my oven. Everything with the oven works find except one button on the interface - the up arrow on the upper right side of the panel (see pic at link below).
https://www.rcappliancepartsimages.com/dbImages/i/00012580/Oven-Control-Board-5700M662-60--03954095.jpg
Do you have this part?
Thank you | Awaiting receipt of timer |
Mississauga, Ontario | Maytag | SVD48600PC | 7601P516-60 | N/A | While trying to change oven light door switch, inadvertently short circuited the L2 and CVB terms. Blew circuit breaker, reset it. Clock light came on flashing - expected if functioning. Turned off circuit breaker,, put everything back together and turned on breaker. Nothing! No clock flash, nada?
You folks repaired this timer back in Nov of 2017 | Repaired |
Black Mountain, North Carolina | Jenn-Air | SVD48600P | 71002959 | none | Oven doesn't work at all. The clock light doesn't work nor does any of the other touch buttons. when press bake, it shows up as 00000 or 8888. you cannot read it at all. nothing happens. | Beyond Repair |
DALLAS, Texas | Jenn-Air | SVD48600P | PS2078136 | none | Up button will not work. | Repaired |
Laval, Quebec | Jenn-Air | SVD48600P | 71002959 | not available | Electric oven no longer turns on. | Beyond Repair |
NORTH CANTON, Ohio | Jenn-Air | SVD48600P | 71002959 | n/a | oven scroll arrows not working | Awaiting receipt of timer |
Peoria, Arizona | Jenn-Air | SVD48600P | 71002957 | N/A | Not able to set temperature or timer. | Beyond Repair |
Marion, North Carolina | Jenn-Air | SVD48600P | 71002957 | n/a | Broiler will not turn off, and possibly oven unit will not turn off. I had to unplug it from the wall to get the broiler to go off. | Repaired |
Goffstown, New Hampshire | Jenn-Air | SVD48600P | 71002959 | no error code, | no error but it started with the up temp button not working, then the next thing was the clock would stop working and just blink, the a couple of times the stove would just shut off during baking. | Beyond Repair |
Eugene, Oregon | Jenn-Air | SVD48600P | 7601P510-60 100-775-00 | NONE | CONTROL PANEL HAS INPUT POWER BUT NO LIGHTED VALUES DISPLAYED. NOTHING INCLUDING CLOCK | Awaiting receipt of timer |
Tacoma, Washington | Jenn-Air | SVD48600P | Whirlpool OEM Part #5700M662-60 | N/A | Timer display went dark. Once before this reset after unplugging the oven. This time it didn't work. | Beyond Repair |
Ajax, Ontario | Jenn-Air | SVD48600PC | 71002959 | temp UP button not r | temp UP button does not respond | Awaiting receipt of timer |
Tacoma, Washington | Jenn-Air | SVD48600P | Whirlpool OEM Part #5700M662-60 | N/A | previous timer failed, not repairable | Awaiting receipt of timer |
Green Cove Springs, Florida | Jenn-Air | SVD48600P | 71002959 | F3 | F3 error message when Bake button pressed. Temperature sensor and relay board replaced but did not correct problem. | Repaired |
Hopkinton, New Hampshire | Jenn-Air | SVD48600P | 5700m662-60 | F-1 | F-1 code will not stop beeping | Awaiting receipt of timer |
Bayfield, Ontario | Jenn-Air | SVD48600PC | PS2078136 | did not see one | everything looks like it is working buttons all work says oven on goes to 100f but does not heat, same for the broil element everything appears normal but no heat. | Repaired |
Lac Supérieur, Quebec | Jenn-Air | SVD48600PC | 5700m662-60 | N/A | Oven stop and screen turn off also after 5 min. We reset and still shut off | Awaiting receipt of timer |
Bogota, New Jersey | Jenn-Air | SVD48600P | 71002959 | none | Shuts off randomly, flashes shuts off at high temp | Repaired |
Nashville, Tennessee | Jenn-Air | SVD48600P | PS2078136 | n/a | The button in the timer is broken. The soft touch face that includes the button has ruptured. | Awaiting receipt of timer |
Billerica, Massachusetts | Jenn-Air | SVD48600P | 5700M662-60 71002959 Maytag | none | My Oven Timer is no longer working correctly, I press timer and timer function comes but when I press the up arrow nothing happens. When I select bake which starts at 350, the up arrow button does not work the temp does not change. The down arrow still works. It appears the up arrow button is broken, can this be repaired? The soft key is slightly more depressed than normal feels broken? | Awaiting receipt of timer |
Snohomish, Washington | Jenn-Air | SVD48600P | 7601P510-60 | Rapid clicking relay | Started by oven not getting to set temp all the time then one day relay stated chattering. This timer was new old stock that I got a few years ago to replace the original that had F3 code after 30 minutes of use. Reinstalled that original and everything works as normal just get the F3 after 30 minutes or so. | Beyond Repair |
Carmel Valley, California | Jenn-Air | SVD48600P | 024-00173-05 | Unknown | Complete failure of the range/oven electronic timer | Awaiting receipt of timer |
Belmont, Massachusetts | Jenn-Air | SVD48600P | 71002959 | N/A | Hi, my oven's timer stopped working. Specifically The bake, convect bake, broil and clean buttons. I would like to replace it, new or used doesn't matter as long as it is functional and in a good condition. If it is not in stock I would like to have it replaced. Please advise on how to proceed. | Awaiting receipt of timer |