- About Us
- Repair Services
- Request Service
- Contact Us
Frigidaire PLDB999CC0 Timer
What is the timer/clock part number for the Frigidaire PLDB999CC0 Dishwasher?
The PLDB999CC0 Dishwasher uses timer part number 154445803.
Do you have a failed Frigidaire PLDB999CC0 control panel? Click here:
We can repair or replace your faulty Frigidaire PLDB999CC0 timer.
PLDB999CC0 are also sometimes referred to using these Alternative Names/Model numbers
Electrolux PLDB999CC0 Dishwasher
PLDB999CC0 Schematic and Wiring Diagrams
Recent Service Requests
Common problems for Frigidaire PLDB999CC0 Timer
Are you encountering a similar problem as them? Contact us now and we will try to help you fix your PLDB999CC0 timer-related problem.
I have a frigidaire 900 series dishwasher. Pldb999cc0 - and it is not properly draining. i can see some water in the drain hose and there is water left in the bottom of the dishwasher. also when it sounds like it is supposed to be draining it sounds like crazy crackling noises - this is a new noise and doesn't sound good. please help
Dishwasher model PLDB999CC0 has started making a clicking sound as the time remaining display blinks. I removed the control panel and took the white cover off the PC board. The clicking is coming from a relay on the board and a green light flashes on the relay box with each click. I suspect that is just a symptom, and there is a mechanical or sensor error that is the cause. The machine does run, but takes a long time to finish a cycle and makes other unusual (and intermittent) sounds while running. I don't see anything impeding the rotater arms or other obvious obstructions. But I'm not sure where to look really. Suggestions?
my Frigidaire dishwasher ( model number pldb999cc0) will not drain water from tube. checked connection/ drainage through disposal;it's ok. took off drain line;nothing is coming out of drain line. checked inside tub to ensure drain was not clogged. Any other suggestions?
Frigidaire dishwasher PLDB999CC0...A long thin rubber strip about a fourth of an inch wide has broken and is coming loose from the bottom of the interiorof the door. There are no signs of leakage. Should this be replaced, and if so with what?
Dishwasher turns on, initial drain cycle works, initial fill cycle works, then falls silent and does not kick into wash mode. The clock continues to function properly, with second drain and fill cycles kicking in. Continues all the way to finish but does not wash. Does anyone know what relay or module needs to be replaced on this appliance?
dishwash fills with water fine and drians fine. But it does not wash the dishes, no water come throw the arms. So is this a pump out, if so were would it be located. Could not fine it on the online diagram. O' I have the electrolux prof. Model # PLDB999CC0
How people are finding this page