- About Us
- Repair Services
- Request Service
- Contact Us
General Electric JKP15 Electric Oven Timer
What is the timer/clock part number for the General Electric JKP15 Electric Oven?
The JKP15 Electric Oven uses timer part number WB27T10063.
Do you have a failed General Electric JKP15 control panel? Click here:
We can repair or replace your faulty General Electric JKP15 timer.
JKP15 are also sometimes referred to using these Alternative Names/Model numbers
GE JKP15 Electric Oven, JKP15BD1BB, JKP15AV1AA, JKP15BW2BB, JKP15BA2BB, JKP15AW2AA, JKP15AD1AA, JKP15WW2WW, JKP15WA1WW, JKP15WA3WW, JKP15AA2AA, JKP15BW1BB, JKP15AA1AA, JKP15WD1WW, JKP15BA1BB, JKP15WA2WW, JKP15CD1CC, JKP15AW1AA, JKP15WW1WW
JKP15 Schematic and Wiring Diagrams
Recent Service Requests
Common problems for General Electric JKP15 Electric Oven Timer
Are you encountering a similar problem as them? Contact us now and we will try to help you fix your JKP15 timer-related problem.
Hi - I have a GE True Temp Oven and have never had problems with it since the house was built in 2000. It will not heat up when I turn it on. I push "Start" and I hear the little click, as if it is on but it doesn't heat up. What do you think is wrong with it? The last time I used the oven to cook was a couple weeks ago. Thank you for your time. Kim
My neighbor and I both have a G.E. True Temp model JKP15 WOAI. During cooking they just turn off. What part number do we need to fix this problem?
The FAN and venting system of my GE microwave (PVM1870SM1) stopped working after 1 week. Its just making sounds. What should I check?
I have a GE Electric Built-in oven (Model JKP15, JRP15 or JTP15) that is giving a function error. I think that it is F2. It was installed in 1999. The upper heating element appears to be stuck on. I have shut it off at the breaker box and it does the same thing when I turn it back on. I have tried to clear it but nothing seems to work. Is there something that I can do to fix this or is it time to call for service.
I have a GE electric over, purchased in 1994. Model is JKP15 or 24. The clock function is telling me it has an F-1 failure. Can you help me with this? Thanks Scotty Robertson XXX@XXXXXX.XXX
The Touch Panel and Control on my GE wall oven, model JKP15, has quit working. In the past, the oven turned off and the display showed an F3 code. For the past three years, I removed the panel and cleaned the connector ribbon. Last week the oven went into "self-cleaning" mode and the door latch started to close. I caught it before the door was completely locked. I cleaned the connector ribbon again and turned off the breaker but nothing worked. I am debating whether to repair or replace my oven. I have been given a quote by a reliable repairman of $471 to replace the Touch Panel and Control. A new oven costs about $1,000. (I am looking at "simple" GE, Frigidaire and Maytag non-convection ovens without a temperature sensor.) I have a space limitation and am concerned that a new oven would not fit into the tight space my current oven fits in. What would you recommend regarding repair? What brand name would you recommend if I choose to replace my oven?
My GE oven (10 yrs old; model JKP15/JRP15/JTP15/JTP17) is not always heating up quickly and to the right temp. Can't the problem only be either be the heating element(s) or the thermostat? Secondly, if I suspect the thermostat, can it be changed easily and inexpensively?
GE Built-in Oven, Electric, Owner's Manual JKP15, JRP15. JTP15, oven approx 9 years old. right in the middle of a bake job at 350F the oven indicator panel flashed "F7". Checked Troubleshooting tips in manual (p.22), posible cause is a function code. I followed instructions by shutting down power at the outside fuse box, then switched on again, still showing "F7" every 30 seconds. Left off, over night to cool oven, after turning on again, another "F7"! What can I do?
This is a GE Profile built in electric oven (approx. year 1998). When oven is set to Bake at 350, it comes up to set temperature, maintains it for about 1/2 hour, then F3 error code. Replaced oven temp sensor unit. Still receiving F3 under same conditions. I think next step is to replace the oven control (ERC). Mfg. part # is WB27K5273, now referenced to new part # WB27T10265. Your item # is AP3141629 (oven control). QUESTIONS: Is the oven control part the next step to try? The configuration of the part is different than the original, so it will probably require some custom wiring. Does the part come with a wiring diagram/instructions? If so, could I get a copy of this before I purchase the part?
ERROR MESSAGE 5F THE OVEN NO LONGER WORKS,, THE ERROR MESSAGE IS 5F MODEL # JKP15AOW1AA WHAT IS THE PROBLEM ?ADVISE THANK YOU
Help needed please. I have a GE Profile Oven (JTP18BW1BB). Over the past several weeks my wife and I have noticed that dishes are not cooking properly as per the recipes. I placed a TC probe from an external digital thermometer inside the oven, closed the door, and set the oven on bake at 350F. over the next 30-45 minutes, I observed the temperature on the external thermometer swing from about 325 to about 380F several times while the oven displayed 350F. I understand the oven has a sensor probe that connects to the control panel and switches the elements on and off. I feel this 55F swing is a little excessive for an electronic control oven. Am I correct? Is this a common problem? Can anyone suggest a troubleshooting procedure? Also, does this oven use the lower and broil elements to maintain the temperature?
I have a built in GE oven model JTP15W0W2WW that will stop working after being on for 15 or 20 minutes. It will start beeping with an error code, F2 or F3 or F5 at the time of the problem. I had read that this problem was usually due to part WB21x5340 (seemingly superseded by WB23T10002) or a bad oven control (unsure of what part number, since looking on Appliance Parts Pros there is a visible white front panel part as well as a control part directly behind that panel). I have tried resetting the power to the oven. This will help for a few minutes, but the errors return shortly. I tried reading the resistance with a multimeter, but I wasn't sure of the probe positioning. I tried replacing part WB21x5340 since it was cheap to do, but that did not help. I would appreciate any help or advice that you can provide! Allen
GE Electric Single OVEN JKP15 Hi - used the self-cleanig feature on my GE for the first time in 7 years since new - after about an hour there was very loud pop/possible electrical short-out type of sound and the display went blank. The main circuit breaker was blown and now I am unable to even open the door to get a look inside or disassemble since the main saftely latch stays engaged since there is no power. Once it cools I will flip the CB back on but I have a feeling it will just 'reblow'. Any ideas on what this problem could be and how do I get the door open? Thanks- Ken Cz
JKP15 Electric Single Oven: Oven keeps beeping with F7 error... Oven keeps beeping with F7 error
Oven will not heat up all the way. It starts at 100 and then moves up maybe 10-15 degrees. Both convection and normal bake won't work. Broil works just fine. I assume the breaker is fine, and upper heating element is ok. I looked at the lower element and it seems fine. It is covered by the bottom tray in the oven. I suspect the temp sensor is bad. What can I check before I call for a very $$ home service. I have a good meter and enough common sense not to get zapped. I hate getting zapped anyway....
I'm having problems finding part #WB27X55483, control panel for GE wall oven. Do I have any other recourse other than buying a new oven?
GE JKP15 does not self clean and minutes cant be set on clock
CODE F8 ON GE TRUE TEMP OVEN