General Electric JGBP79WEW1WW Gas Range Timer
What is the timer/clock part number for the General Electric JGBP79WEW1WW Gas Range? The JGBP79WEW1WW Gas Range uses timer part number WB12K0019. Do you have a failed General Electric JGBP79WEW1WW control panel? Click here: 
We can repair or replace your faulty General Electric JGBP79WEW1WW timer. JGBP79WEW1WW are also sometimes referred to using these Alternative Names/Model numbersGE JGBP79WEW1WW Gas Range JGBP79WEW1WW Schematic and Wiring DiagramsCity | Manufacturer | Model Number | Part Number | Failure Code | Problem Description | Resolution |
---|
Phoenix, Arizona | General Electric | JGBP79WEW1WWW | WB12K19 | F1 | Intermittent F1 and audible alarm - cleared by pressing OFF/Clear button, but returns after 30 seconds. Range top and oven continue to operate. | Awaiting receipt of timer | Placentia, California | General Electric | JGBP79WEW1WW | WB12K19 | F1 | | Timer inspected, no repairs necessary | Schenectady, New York | General Electric | JGBP79WEW1WW | WB12k19 | None responding | Timer is not responding,push buttons does not respond, though clock is still functioning | Repaired | Schenectady, New York | General Electric | JGBP79WEW1WW | WB12k19 | None responding | Timer is not responding,push buttons does not respond, though clock is still functioning | Repaired | Burnaby, British Columbia | General Electric | JGBP79WEW1WW | WB12K19 | F-3 | Oven quits with alarm and code F-3 | Awaiting receipt of timer | PITTSBURGH, Pennsylvania | General Electric | JGBP79WEW1WW | WB12K19 | F1 | tHE STOVE WILL NOT WORK JUST BEEPS REALLY LOUD CONSTANTLY. STOVE TOP DOES WORK BUT IT BEEPS THE WHOLE TIME YOU USE IT. | Awaiting receipt of timer | Valparaiso, Indiana | General Electric | JGBP79WEW1WW | WB12K19 | None | Went black-non functional | Repaired | Torrance, California | General Electric | JGBP79WEW1WW | WB12K19 | Display does not tur | All burners are working fine. Oven was working ok, and all of the sudden the display turned off and the oven is not operational since the controls are on the touch pad. | Awaiting receipt of timer | Raleigh, North Carolina | General Electric | JGBP79WEW1WW | WB12K19 | F3 | F3 error appears when trying to use the oven. | Repaired | Schenectady, New York | General Electric | JGBP79WEW1WW | 191D001P020 100-00676-02 585/920F 9634 GAS | touchpad not functio | I am providing here timer p/n after removal, previous sent email, and received following reply: Please reply back ASAP
You need a new touchpad
Regards,
Howard Simons
ApplianceTimers.com
1-888-519-1939
On Mon, Apr 25, 2016 at 11:46 PM, Francisco Hernandez <> wrote:
Thank you for entering the details of your timer problems into our system. We will check our inventory for a reconditioned timer that matches your failed timer and we will let you know whether we have a replacement. If we do not have a replacement, and you wish to send your timer in for repair, Please print this email and send it along with your timer. You can cut off the bottom portion of the email to use as your shipping labels.
Customer Information | Repaired | Toronto, Ontario | General Electric | JGBP79WEW1WW | WB12K0019 | N/A | Most buttons on touch pad unresponsive. Occasional/Random responsiveness from all buttons. Can't initiate sequence to start oven. | Awaiting receipt of timer | Ottawa, Ontario | General Electric | JGBP79WEW1WW | WB12K0019 | n/a | The timer is completely blank and unresponsive. | Awaiting receipt of timer | Fair Lawn, New Jersey | General Electric | JGBP79WEW1WW | WB12K0019 | F1 | Beeps all the time. Clear/Off only helps for 30 seconds. Power must be shut off to stop. | Awaiting receipt of timer | North York, Ontario | General Electric | JGBP79WEW1WW | WB12K0019. | F1 | i would be interested in a new one but I suspect you only have rebuilt? | Awaiting receipt of timer | Wahoo, Nebraska | General Electric | JGBP79WEW1WW | WB12K0019 | F-1 | F-1 code constant and beep sound can't reset it. | Awaiting receipt of timer | Bartlett, Illinois | General Electric | JGBP79WEW1WW | 191D1001P020 | F1 | Oven would shut off on its own. I don't remember the code as this happened several months ago. This started soon after I ran a self-clean cycle. | Awaiting receipt of timer | Bartlett, Illinois | General Electric | JGBP79WEW1WW | 191D1001P020 | F1 | Oven shuts off by itself. | Awaiting receipt of timer | Bartlett, Illinois | General Electric | JGBP79WEW1WW | 191D1001P020 | F1 | Oven shuts off by itself. | Awaiting receipt of timer | Bartlett, Illinois | General Electric | JGBP79WEW1WW | 191D1001P020 | F1 | Oven would shut off on its own. I don't remember the code as this happened several months ago. This started soon after I ran a self-clean cycle. | Awaiting receipt of timer | Bartlett, Illinois | General Electric | JGBP79WEW1WW | 191D1001P020 | N/A | Oven would shut off on its own. I don't remember the code as this happened several months ago. This started soon after I ran a self-clean cycle. | Awaiting receipt of timer | Bartlett, Illinois | General Electric | JGBP79WEW1WW | 191D1001P020 | F1 | Oven shuts off by itself. | Awaiting receipt of timer | MORRIS PLAINS, New Jersey | General Electric | JGBP79WEW1WW | AP2020547 | N/A | SOME OF THE BUTTONS WORK AND SOME DON'T | Awaiting receipt of timer | Cornwall, New York | General Electric | JGBP79WEW1WW | GE-WB12K19 | None | There is apparently no power to the timer as all the displays are blank - no error codes shown. | Repaired | Beloit, Wisconsin | General Electric | JGBP79WEW1WW | 100-00676-02 | N/A | Error code | Awaiting receipt of timer | Woodstock, New York | General Electric | JGBP79WEW1WW | WB12K19 (AP2020547) | whole board flashes, | clock/ control will "freak out" all lights flashing, then time will start flashing by itself..., if you hit "clear" then ok for awhile. Oven wouldn't work unless you reset breaker, then usually starts to work. Eventually the clock/control "freaks out " again by itself even if your not using oven or stove. | Awaiting receipt of timer | WINDSOR, Ontario | General Electric | JGBP79WEW1WW | WB12K19 | DISPLAY DARK | DISPLAY DARK | Awaiting receipt of timer | Okotoks, Alberta | General Electric | JGBP79WEW1WW | WB12K19 (Timer part # indicated by parts website) | Usual F3 or just off | Started out shutting off oven and giving F3. Replaced oven temp sensor (although tested ok). Okay for a while then started shutting down with no error code, or F2, or F3.
Seemed to work if we flipped the mounted control down onto the back burners and shielded the board from the oven exhaust but it does no seem to get particularly warm in the control area. | Repaired | Newmarket, Ontario | General Electric | JGBP79WEW1WW | WB12K009 | F3 | I am getting an intermittent F3 error code. Sometimes as soon as i try to bake or broil. Other times after it has heated up to the required temperature and run for a bit. I have replace the oven sensor with a bran new one and still get the same error. I have also checked the wiring to the sensor it is good. | Repaired | RIVERSIDE, California | General Electric | JGBP79WEW1WW | WB12K19 ? | N/A | The display is dim and inconsistently lit. Some segments of the numbers are dimmer than the others. This is from my 90 year old mother's oven, and she currently has to turn off all of the lights in her kitchen in order to try to read the display. We would like it as bright as it can possibly be, please.
I had tried a DIY repair from a YouTube video, but it wasn't enough. I had emailed you guy and you said that you could still repair it. | Repaired | Midland, Ontario | General Electric | JGBP79WEW1WW | 191D1001P020 | Blank | Blank. No display | Beyond Repair | Antigo, Wisconsin | General Electric | JGBP79WEW1WW | WB12K19 | N/A | WILL BEEP, NO ACTION FOR OVEN OR BURNERS, CONTROL IS BLANK, OVEN LIGHT DOES NOT WORK, BURNERS WILL NOT IGNITE | Awaiting receipt of timer | Mississauga, Ontario | General Electric | JGBP79WEW1WW | WB12K19 | F 1 | I WAS TOLD ITIS DONE | Awaiting receipt of timer | Ancaster, Ontario | General Electric | JGBP79WEW1WW | WB12K19 | F3 | Intermittent F3 error. Oven will work sometimes and then not others. It has turned off the oven by itself as it preheated. It has heated to the right temperature and then worked for 15 to 20 minutes and then F3 error. I replaced the oven temperature sensor. It tested at 1100 Ohms. I then checked the wiring to the timer board and it also checked at 1100 Ohms. Hopefully the problem is with the board and it can be repaired. It is out and ready for shipping. When I removed it the E7 ground connector broke off so it can hopefully be repaired too. It is 23 years old so I guess it was brittle. | Repaired | Windsor, Ontario | General Electric | JGBP79WEW1WW | 100-00676-02 | NO CODE VISIBLE | The timer made a popping sound and the display went blank. Well, mostly blank - ghost letters were visible but, they could not be read.
Does not respond to any inputs. | Beyond Repair | Whitby, Ontario | General Electric | JGBP79WEW1WW | 191D110P020 (WB12K19) | F1 error | As soon as connect to power, There is an alarm beep and the screen shows F1 code. | Repaired | Okotoks, Alberta | General Electric | JGBP79WEW1WW | Unsure, Probably WB12K19 | No Failure Code Repo | 1) Display is very dim, nearly can't read.
2) Oven does not come to set temperature. Beeps to indicate ready at a temperature well below setting. Slowly rises a bit but does not reach set temperature. (Temperature sensor thermister replaced but made no difference.) No Failure Codes. Might have been intermittent for a while but is always a problem lately. | Repaired | Mason, Ohio | General Electric | JGBP79WEW1WW | WB12K0019 | N/A | The controls for the oven are completely blank. No lights, no beeps. The power works because the stove ignites and the light turns on. Nothing happened when I tried to reset it by unplugging/plugging in the appliance. | Repaired | Mason, Ohio | General Electric | JGBP79WEW1WW | WB12K0019 | N/A | I received my repaired timer this week and am delighted that the oven is once again operational. Unfortunately, the clock speed is traveling at twice the normal speed. Every 30 seconds or so the minute advances. This will affect my timed bakes or delayed start. I just can't do that much math to guess what the time will be when I need it. It appears that everything else is operational. | Beyond Repair | London, Ontario | General Electric | JGBP79WEW1WW | WB12K0019 | F3 | Gas range oven problem started with lower element not working, Upper did work. Service technician tested gas igniter as OK and reported the board/relay bad. I replaced both relays and all worked. About a month later F3 code appeared during a cook cycle. Tests of the oven with separate thermometer check out a various temp. But on occasion failed with an F3 code. | Repaired |
Common problems for General Electric JGBP79WEW1WW Gas Range TimerAre you encountering a similar problem as them? Contact us now and we will try to help you fix your JGBP79WEW1WW timer-related problem. How people are finding this page
|