7601P17560 Magic Chef/Maytag/Magic Chef Range/Stove/Oven Timer Repair

DESKTOP Failure codes, problems, and resolutions for Magic Chef/Maytag/Magic Chef timer model # 7601P17560

Magic Chef ERCs and Magic Chef stove clocks and timersMaytag ERCs and Maytag stove clocks and timersMagic Chef ERCs and Magic Chef stove clocks and timers Manufacturer :  Magic Chef/Maytag/Magic Chef
Part Number :  7601P17560
Appliance Type :  Range/Stove/Oven
Color : 
Description :  Electronic Range/Oven Timer

 
 
Do you have a failed Magic Chef/Maytag/Magic Chef 7601P17560 timer?
Click here:

We can repair or replace your faulty 7601P17560 timer.
Request Appliance Timer Service

Recent Service Requests for Magic Chef/Maytag/Magic Chef Part Number 7601P17560

CityModel NumberFailure CodeProblem DescriptionResolution
Windber, Pennsylvania38HA 6TVW Code EVN/AClock fades in and out can’t reset it or set oven temperature or any of the buttonsAwaiting receipt of timer
Caledonia, Wisconsin38HA-6TVWN/AEither new or reconditioned.Awaiting receipt of timer
Kensington, Maryland38HA6TVW EVN/AThe burners work. The oven/broiler does not work. Repairman came. Said bad part is the ELECTRONIC CLOCK. Couldn’t find a new part online. Gave me the part number. Suggested it might be able to be repaired.Repaired
Westport, Massachusetts38ha-36txno codeThe oven does not start. You set it but after several seconds display goes blank. The timer will make a buzzing sound if you press the button again just before it goes off.Beyond Repair
Scott Township, Pennsylvania38HN-36TXNoneOven will shut off before reaching desired bake temperature.Repaired
Bay City, Michigan38HA-6TVWNAWhen oven temperature is set the oven does not reach desired temperature. Maximum temp may reach approximately 100 degrees even when set to maximum temperature.Repaired
Helotes, TexasN/ATEMPERATURE IS SET - OVEN STARTS THEN SHUTS OFF PRIOR TO REACHING TEMPERATURE . NEED TO HOLD DOWN BAKE TEMP BUTTON UNITL TEMP GOES ABOVE 250 BEFORE IT STAYS ONAwaiting receipt of timer
Vancouver, Washingtonnoneoven shuts off after setting pre-heat temp or fails to reach internal temperature shown on digital readoutAwaiting receipt of timer
Cave Creek, ArizonaNone ShownThe controller does not get the oven temperature up to the correct levelRepaired
HAZLE TWP, PennsylvaniaLCRE805N/AHIGHEST TEMP WILL ONLY REACH 350*, CAN SET TO 550*, BUT WILL NOT REACH TEMP. TEMP OFF BY 200*Awaiting receipt of timer
alborn, Minnesota38ha-36txn/aChecked both elements and replaced oven probe but oven still shows wrong tempAwaiting receipt of timer
Bethany, Oklahoma38HN-36TXNoneActual Oven Temperature is Approx. 120-140 Degrees lower that the Controller displays. Starts out with cold oven readign 190-220 degrees. Temperature Display rises even though the thermocouple is not inside the oven.
Replaced Thermocouple Sensor with same results.
Repaired
Westfield, New York38HK-6TXWunknowncannot turn on oven or anything related to oven use. also cannot set clockBeyond Repair
Norton, Massachusetts38HK-6TXWF1Oven will not reach full temperature when set at 400 only reached 200.Awaiting receipt of timer
jacksonville, Illinoislcre775N/Abake temperature button sticking on, while on board sparks and buzzesRepaired
Warren, Michigan38ha-36txN/AThermal sensing probe has been checked and is good.

I set oven to 400 degrees and I get 275 degrees.
Repaired
Camak, Georgia38HN-36TXN/AOven will not come on (most of the time). If it does come on, it will go right back off. Occasionally it will work. Were told to purchase new control board to fix problem. Have not been able to locate replacement control board.Repaired
Fairport, New York38HN-36TXnoneThe oven temperature is too low. When the timer is set at 350 degrees, the actual oven temp is 175 degrees; when set at 505 degrees, the actual oven temperature is 275 degrees. The problem is NOT the oven sensor. I changed the sensor and the problem continued. The problem is not the heating element since it glows red-hot. The timer is shutting off the element too soon.Repaired
Clinton, TennesseeMaytag Self Cleaning OvenN/ABake element does not work. Relay does not activate for Bake cycleRepaired
athens, Washingtonbcre955N/Ai just want to order the part u have in stock, already verified thst u have it in stock, i will send u the bad unit right after i get the reconditioned one fromu guys.Repaired