WB27X5584 General Electric Range (Stove, Oven) Timer Repair

Failure codes, problems, and resolutions for General Electric timer model # WB27X5584

General Electric (GE) ERCs and General Electric (GE) stove clocks and timers Manufacturer :  General Electric
Part Number :  WB27X5584
Appliance Type :  Range (Stove, Oven)
Color : 
Description :  Electronic clock control

 
 
Do you have a failed General Electric WB27X5584 timer?
Click here:

We can repair or replace your faulty WB27X5584 timer.
Request Appliance Timer Service

Recent Service Requests for General Electric Part Number WB27X5584

CityModel NumberFailure CodeProblem DescriptionResolution
Effingham, South CarolinaJSP69BVBBNONEAFTER A STORM, THE KEYPAD WAS NO LONGER WORKING. IT DID NOT DISPLAY ANY ERROR CODES OR ANY INFORMATION. IT WAS LAST USED ON A FRIDAY EVENING BY USING THE UPPER BROIL FUNCTION AND ON A SUNDAY, IT NO LONGER WORKED.Beyond Repair
Kennett Square, PennsylvaniaModel #:JSP69BVBBF3Replaced oven sensor and f3 error continues and won’t let oven heat passed 350. At 350f a beeping sounds begins.Awaiting receipt of timer
Columbia, TennesseeJsp69wvwwN/ADisplay does not work and oven does not work.Awaiting receipt of timer
Osteen, FloridaJSP69BVBBN/ATimer goes blank when the oven is bumped. Lightly tapping on the controller brings it back.Repaired
Eastover, North Carolinajsp69wvwwF03Oven begins to heat and then get an F03 error code. Replaced Oven temp sensor and still have problemRepaired
Mccoll, South CarolinaF1Oven will not workAwaiting receipt of timer
West Chester, PennsylvaniaJSP69BVBBNoneWhen selecting the BAKE or BROIL functions, no heat results, although the Control CRC2C displays appear normal in all respects (e.g.for BAKE, 100 degrees is displayed as usual, but then never changes, & the element remains cold). Both elements and the thermostat,temp sensor, door latch switch & wiring all check out ok. Please service & return.Repaired
ALLENTOWN, PennsylvaniaJSP69WVWWNAUnit shows 100 degrees and does nothing. Local service said we need to find a replacement timer. I would be happy to return the bad one for refurbishment for another customer.Awaiting receipt of timer
Portland, OregonJSP69WVWWF3The oven begins heating and then shuts off after about 5 minutes. It displays the F-3 error code and will not turn back on for at least an hour or so until it completely cools down.Awaiting receipt of timer
Massanutten, VirginiaJSP69BVBBF3 - also just shutsThe timer will shut off entirely (all display values go blank). You can turn it back on so that the display reappears(sometimes); sometimes you have to hit it to get the display to reappear. If you are using it for a few hours, you will get an F3 code. You can then stop the oven and reset the oven time and temperature. The longer you use it, the more often the display will go blankRepaired
Mill Hall, PennsylvaniaJSP 69 WVWWF3; also have seen FWhen oven reaches desired temperature, it may work for a while, but then typically it shows the F3 failure code. I will have to reset it 4-5 times before it will actually hold the temperature and stay on so I can bake something in the oven. I did replace the temperature device inside the oven, so I know that is not the problem.Repaired
Supply, North CarolinaJSP69WVWWN/ATemperature will not heat up at all.Awaiting receipt of timer
PAnama City Beach, FloridaJSP69BVBBF3F3 / F4 error code show intermittentlyAwaiting receipt of timer
Vina, AlabamaJSP6BVBBN/AOven will not heat up. Will not bake or broil.Awaiting receipt of timer
Anchorage, AlaskaJSP69BVBBOven will not come oOven will not come on the majority of time but has come on bye very very infrequently does that happenRepaired
Lake Park, GeorgiaN/Awill not workAwaiting receipt of timer
Cheshire, Connecticutjsp69bvbbf3f3 appears intermittently when bake is pressedRepaired
Dundee, New YorkJSP69BVBBscreen deadThe timer went blank completelyAwaiting receipt of timer
ROME, Georgiajsp69bvbbf-3Heats for a while then begins to beep and show F-3Repaired
Rockwell, North CarolinaJSP69F1Oven continues to heat after reaching desired temperature. It eventually overheats and displays an F1 failure code.Timer inspected, no repairs necessary