| Abilene, Kansas | 9114012990 | ? | Oven will nort turn on. Oven light comes on only. | Awaiting receipt of timer |
| Martinsville, Virginia | 911-4012990 | N/A | No LED readout when plugged in | Awaiting receipt of timer |
| Kinston, North Carolina | 9114012990 | Never showed one | Turn oven on with in 15 seconds turns off. | Awaiting receipt of timer |
| Smyrna, Tennessee | 911.4712992 | N/A | Oven will not come on checked incoming voltage it's what it should be | Awaiting receipt of timer |
| Red oak, Texas | | Does not come on | Does not come o. At all | Awaiting receipt of timer |
| Burgettstown, Pennsylvania | 911.4012990 | N/A | Oven temp. will only go to about 200 degrees | Awaiting receipt of timer |
| SUMMERVILLE, South Carolina | JDS27GOP2BG | N/A | TIMER COMES ON BUT ELEMENTS IN OVEN DO NOT HEAT UP . AFTER A FEWW SECONDS IT TURNS ITSELF OFF. | Repaired |
| West Bloomfield, Michigan | JDC27GP2BG | no code given.Wont g | Wont get to temp. at 500 it only gets to 299
We need at least a referb if you have one please | Awaiting receipt of timer |
| Bristol, Connecticut | JDS26G0R2AD | None shown | Clock works. Bake and Broil functions buss when selecting them. Also the lower oven coil heats up when selecting the Broil Function (the upper coil does not heat up). When selecting the bake function and touching the up arrow the digital window shows 350 degrees on top and 100 degrees on the bottom, the lower coil begins to heat, but the digital lights go out after about 10 or 15 seconds and the coil begins to cool. | Awaiting receipt of timer |
| Naples, Florida | JDC27G0P1BG | none | Oven timer "beeps" in 1-2 minutes indicating that selected bake temperature has been reached when this is not correct. Temperature selector must be set to max in order to achieve about a 400 temp. Broiler element seems to work OK | Awaiting receipt of timer |
| MORGANTOWN, West Virginia | JDS27G0P2BG | NO CODE | BAKE WILL NOT HEAT UP AND ELEMENT IS GOOD.BROIL AND ALL OTHER LIGHTS WORK I THINK. NO POWER TO LOWER ELEMENT | Repaired |
| Pass Christian, Mississippi | 9114012190 | NONE | when I turn it on it only stays on for a few minutes then it turns back off. | Repaired |
| Parsons, Tennessee | JDC27GoP1BG | unknown | Shows 195* temp at room temp. Will not reach selected temp | Awaiting receipt of timer |
| Mascotte, Florida | | F1 | Waont warm and beeps. | Awaiting receipt of timer |
| HUNTSVILLE, Alabama | JD527GOP1BG | NC-RANGE TEMP WILL N | WHEN SETTING RANGE TEMP, A LOUD "DUCK" SOUND COMES FROM THE MODULE AND THE TEMP WILL NOT SET OR HOLD. IT WILL SOMETIMES ACK AS IF IT IS HEATING UP AND WILL SHUTOFF. | Repaired |
| Newnan, Georgia | 9114012190 | F1 | F1 | Awaiting receipt of timer |
| Chesapeake, Virginia | 911.4012190 | No failure code give | -Doesn't reach desired temperature (ex. must set to 500 to get 350).
-Panel buttons extremely difficult to push to enable.
-Heat probe sensor already replaced.
-Baking element already replaced. | Repaired |
| benton, Arkansas | | N/A | oven only works on max temperature. any setting lower than that, it warms up for one to two minutes and shuts off and reads the set temperature, not the actual temperature. | Beyond Repair |
| Harvest, Alabama | JDC27GOP1BG | none | Controller is 20 years old and it takes forever for the oven to heat up. I have to set the temp. 100 degrees higher on the controller than what is needed and then it takes about an hour for the oven to reach the temperature. Clearly a PID problem, but GE doesn't supply these controllers any longer. Trying to get the oven ready for the holidays. THANKS! | Replaced with reconditioned timer |
| Mena, Arkansas | 911.4012990 | F-1 | Oven works fine but it Beeps constantly and displays a F-1 message when oven is not in use. | Repaired |
Established in
